2007 Honda Element Ex on 2040-cars

Auto blog

Fire up your 3D printer! Honda releases data for several of its past concepts [w/video]

Futurists have been treating 3D printing like it is the second coming of the Industrial Revolution for years. Everyone will have a 3D printer in their garage and be able make practically anything at home before you know it, right? Well... not quite.
While we can imagine a piece of trim breaking on our car and being able to download the file to print a new one at home, the reality is that 3D printing is still in its earliest stages as a consumer device. Still, Honda is capitalizing on the technology by allowing people to make models of its concept cars at home.
The Honda 3D Design Archive currently consists of five models based on the Fuya-Jo, FSR, Kiwami, Puyo, and NSX concepts. The printer files can be downloaded from the web and carry Creative Commons 4.0 licenses, which allow them to be freely shared. Honda promises that more files will be added to the archive soon.

Honda expands Takata airbag recall to 5.4M units in the US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.