Clean Carfax Heated Seats Leather Trim Stability Control Mp3 Decoder Xm Radio on 2040-cars

Auto blog

Honda recalling nearly 900,000 Odyssey minivans over fire fear

Honda is recalling nearly 900,000 2005 to 2010 model year Odyssey minivans due to a fault with the fuel pump that could cause them to catch fire.
According to the National Highway Traffic Safety Administration filling, if exposed to "acidic chemicals and a high temperature environment," the cover of the fuel pump strainer could crack and cause a gasoline smell in the minivan or possibly allow the fuel to leak out. Denso supplied the fuel pumps on the vehicles, and the report says that Honda first began studying the problem in October 2012 but didn't finally confirm the cause until March 6, 2014. The recall affects 886,815 Odysseys, and Honda has received 187 warranty claims related to the issue. However, there have been no fires or injures reported.
Unfortunately, Honda says that it currently doesn't have enough replacement fuel pumps to fix all of the vehicles and doesn't expect to have the parts ready until this summer. It's sending a letter to owners telling them about the recall and is sending a second notification when the pieces are at dealers. The entire notification including affected VINs can be viewed as a PDF here, and the shortened version from the NHTSA can be viewed below.

Inside Honda's ghost town for testing autonomous cars

On the edge of the San Francisco suburb of Concord, California sits a ghost town. Dilapidated buildings and cracked roads are framed by overgrowth and slightly askew street signs. The decommissioned five acre portion of the Concord Naval Weapons Station that once housed military personnel and their families is now home to squirrels, jack rabbits, wild turkeys and Honda's mysterious testing lab for autonomous vehicles. This former town within a Naval base – now dubbed "GoMentum Station" – is the perfect testing ground for Honda's self-driving cars. An almost turn-key solution to the problem of finding somewhere to experiment with autonomous vehicle inside an urban area. Thanks to the GoMentum Station, the automaker has access to 20 miles of various road types, intersections and infrastructure exactly like those found in the real world. Just, you know, without all the people getting in the way. While the faded lane markers and cracked asphalt might initially make it difficult for the car to figure out what's going on around it, that's exactly what you want when training a self-driving system. Many roads in the real world are also in dire need of upkeep. Just because autonomous vehicles are hitting the streets doesn't mean the funding needed to fix all the potholes and faded lane markers will magically appear. The real world doesn't work that way and the robot cars that will eventually make our commutes less of a headache will need to be aware of that. Plus, it's tougher to train a car to drive downtown than to barrel down the highway at 80 miles per hour. A company is going to want to get as much practice as possible. While semi-autonomous driving on the everyone-going-the-same-way-at-a-constant-speed freeway is already a reality, navigating in an urban environment is far more complex. If you've driven on the streets of Los Angeles, San Francisco, New York, Chicago or Seattle you know that driving downtown takes far more concentration than cruising down the interstate. With all that in mind, Honda's tricked out Acura RLX did a good job during an (admittedly very controlled) hands-free demo. It didn't hit either of the pedestrians walking across its path. It stopped at stop signs and even maneuvered around a mannequin situated in the middle of the road. The reality is, watching a car drive around the block and safely avoid stuff is boring. Not to metion, Google has been doing this for a while in the real world.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.