2023 Honda Civic Touring on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Alonso and Button try out Honda's Uni-Cub mobility scooter

As two of the best racing drivers in the world, Fernando Alonso and Jenson Button have some pretty serious wheels at their disposal. They'll both be driving the latest McLaren-Honda MP4-30 on the track this year, will likely have access to supercars like the new Acura NSX or McLaren 650S for toying around with when they're not working, and probably each have an enviable motor pool of their own at home. This, then, must have been quite a change of pace for them both. As you can see from this video tweeted by McLaren, the two highly accomplished F1 drivers hopped on a very different set of wheels recently: namely, Honda's Uni-Cub "personal mobility device." The experimental electric motorized bar stool is controlled by shifting your weight to and fro (like a Segway), but stands just two feet tall and tops out at less than four miles per hour. At that rate, it would take them almost an hour to take one lap around the Circuit of the Americas in Austin, TX, where the 2015 United States Grand Prix will be held in October. In that same time span, for perspective's sake, they'd be lapped more than 30 times by their rivals... so they'd better stick to the racing machinery once the championship gets under way. What happened when @alo_oficial and @JensonButton got hold of a UNI-CUBAcA?A¦ https://t.co/YP8r9z1OsG - McLaren (@McLarenF1) February 10, 2015

Comma.ai makes your car semi-autonomous for $999

At TechCrunch's Disrupt conference in San Francisco, Comma.ai founder George "Geohot" Hotz announced the launch of the Comma One semi-autonomous driving device. Hotz said at the conference that his company has worked on the Comma One for about a year, and it will be available at the end of the year for $999 and a $24 per month subscription fee. But aside from the reasonable price, which TechCrunch points out is possible thanks to off-the-shelf components, the appeal here is that it's an add-on to an existing car that can be installed at home by the car's owner. This gives people with normal cars the opportunity to have semi-autonomous features without having to buy an entire vehicle... that is, if you have a Honda or Acura with lane-keeping assist, since Comma One is currently only compatible with those vehicles. It remains to be seen if the company will add more vehicles to the list over time. The device is roughly the size of a large cell phone or aftermarket navigation system, and it has a screen on the front and a pair of cameras on the back. The computer combines information from the device's cameras and the car's radar sensors to understand what's happening and how to respond. Hotz explained at the conference that this system is similar in capability to the Tesla Autopilot system, and will be able to complete a drive, start to finish, without the driver having to touch anything. He did however emphasize that the driver must still pay attention in the event something goes wrong, comparing the experience to watching a young student driver. Hotz told TechCrunch that the device should start shipping at the end of the year. He also said that owners of compatible Honda products in the San Francisco area are eligible for beta testing, and can get involved by emailing him at george@comma.ai. So if you've been pining for a semi-autonomous vehicle of your own, but couldn't spring for a Tesla, you won't have to wait much longer. We should point out that we don't know yet how well the system works, though we hope to find out soon. Related Video: