2008 Honda Civic Si 2 Door Mods Bc Cams Hondata Flashpro Fast 6 Speed 08 on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Honda installs 3-minute, fast-fuelling hydrogen fuel station in California

OK, but let's see how well Honda can control hydrogen refueling temperature in Houston or Buffalo. That's what some pessimists may be saying now that the Japanese automaker has installed a fast-fueling hydrogen station in the oh-so-temperate environs of Torrance, CA. That city is about 20 miles southwest of downtown Los Angeles and a sliver of it actually touches the Pacific Ocean, so we're not talking about wild swings in air temperature here. Honda is calling its fast-refueling platform the MC Fill (we'd expect a lawsuit if it was McFill, even though that'd be clever) and says that filling up takes about 45 percent less time than the typical hydrogen-refueling station. That's because the system monitors the ambient temperature in order to speed up the process. There's more scientific stuff in there - for example, the fact that the MC name comes from the "two key values in a heat transfer equation- 'M' for mass and 'C' for specific heat" - but the long and the short of it is that a hydrogen fuel-cell vehicle can fill up in less than three minutes. That's pretty impressive, despite the distinct lack of vehicles needing to charge that fast today. Honda unveiled its FCEV Concept vehicle at the Los Angeles Auto Show last November. The five-seat vehicle has a range of more than 300 miles, while its fuel-stack power density is about 60 percent higher than its previous version. The production version is due to arrive in the US in 2015. Check out Honda's press release below. Honda R&D Installs Advanced Fast-Fill Hydrogen Refueling Station -- New station on Honda R&D Americas' Torrance, California campus built in anticipation of Honda's next-generation fuel cell electric vehicle, due in 2015 -- Honda-developed hydrogen refueling protocol significantly reduces fill time TORRANCE, Calif., March 3, 2014 /PRNewswire/ -- Preparing for the 2015 introduction of the next Honda fuel cell-electric vehicle (FCEV), Honda R&D Americas has installed a state-of-the-art hydrogen refueling station on its Torrance, California campus. This advanced station will serve as a platform for demonstrating and validating the enhanced hydrogen fueling protocol developed by Honda, named the MC Fill. With the aim of standardizing this new protocol, Honda will make the new research station available to other automakers to further validate the MC Fill protocol's performance and functionality.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.