Honda Accord Ex-l Sedan Navigation Cd Changer Heated Seats Moonroof Leather on 2040-cars

Auto blog

Honda recalls 2.23 million vehicles to replace Takata inflators

The Basics: Honda and Acura will recall 2.23 million vehicles in the US. The affected models are: 2005-2012 Acura RL 2007-2011 Honda CR-V 2007-2016 Acura RDX (early production MY 2016 vehicles only) 2007-2014 Honda Ridgeline 2009-2014 Honda Fit 2009-2014 Acura TL 2010-2014 Honda FCX Clarity 2010-2014 Honda Insight 2010-2013 Acura ZDX 2011-2015 Honda CR-Z 2013-2016 Acura ILX (early production MY 2016 vehicles only) The Problem: These vehicles have Takata's PSDI-5 airbag inflator on the driver's side, and this part could rupture if the airbag deploys. Injuries/Deaths: There are no reported ruptures of the PSDI-5 inflator in Honda or Acura vehicles. However, Takata's exploding components have links to at least 10 deaths worldwide because they can spray shrapnel at occupants. The Fix: Honda and Acura dealers will replace the inflators with parts from an alternative supplier. If You Own One: The repairs will begin this summer. Owners will receive a letter notifying them about the recall within 60 days and will get a second message when the parts are available. The company will prioritize older models in high-humidity regions first because these inflators would be most likely to rupture. More Information: Honda and Acura have now recalled 8.51 million vehicles in the US to replace their driver or passenger side inflators. This latest expansion came in the wake of a driver death from an airbag rupture in a Ford Ranger. Ford and Mazda already enlarged their safety campaigns. The National Highway Traffic Safety Administration also announced Audi, BMW, Daimler Vans, Mercedes-Benz, Saab, and Volkswagen would have recalls for this issue, too. Statement by American Honda Regarding Nationwide Recall of Certain Takata PSDI-5 Driver Front Airbag Inflators Feb 3, 2016 - TORRANCE, Calif. Approximately 2.23 million Takata PSDI-5 driver front airbag inflators will require replacement in Honda and Acura vehicles in the U.S. No PSDI-5 inflator ruptures have been reported in Honda or Acura vehicles Takata inflators will be replaced with parts from an alternative supplier with repairs beginning in the Summer of 2016 Based on a recent Defect Information Report (16E-005) from the airbag inflator supplier, Takata, Honda will conduct a national recall (16V-061) of approximately 2.23 million Honda and Acura vehicles in the United States to replace, free of charge to vehicle owners, the PSDI-5 Takata driver front airbag inflators installed in those vehicles.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.

2013 Honda Fit Sport

Revisiting The Runabout Of Record
The current Honda Fit has been around the block a few times. The subcompact hatch has soldiered on without significant revision since its first update for US customers in 2009, and while Honda is on the verge of launching a third generation, we thought we'd take the time to see how the runabout stacks up against the new wave of small, efficient and plucky five-doors now on the American market. Those include old standbys like the Nissan Versa and Toyota Yaris, as well as relative newcomers like the Chevrolet Sonic and Ford Fiesta.
Those machines may have all covered ground on the Fit, but Honda's wee machine holds a pleasant surprise for those buyers still willing to give the car the time of day. While the rest of the Japanese automaker's lineup has succumbed to dreaded model bloat, the Fit has remained true to the spirit of Honda that we remember from our vagabond youths. This may very well still be the closest genetic ancestor to the Civic models of old.