2010 Honda Accord Sdn on 2040-cars

Auto blog

Honda marks 20 million vehicles made in the USA

Japanese automakers manufacturing in the United States is nothing new. But it was in November of 1982 when the first Honda Accord rolled off the assembly line in Marysville, OH. It was the first Japanese vehicle assembled in the US, and in the nearly 32 years since, Honda has made 10 million Accords here for a total of 20 million cars manufactured in America - enough to span from New York to San Francisco twenty times. It's that double landmark which Honda is now celebrating.
Honda has come a long way in those three decades, keeping that original plant in Marysville on line while expanding to three more - in East Liberty, OH; Lincoln, AL; and Greensburg, IN - with a fifth plant (the Performance Manufacturing Center) opening on the same site in Marysville to build the Acura NSX next year. It also builds engines in Lincoln and in Anna, OH, and automatic transmissions at Russells Point, OH, and Tallapoosa, GA.
Between those seven sites, Honda produces 11 different models, including the Accord, Civic, Crosstour, CR-V, Pilot, Odyssey and Ridgeline as well as the Acura ILX, TL, RDX and MDX. Production keeps on ramping up as Honda produced a record 1.3 million vehicles in the US last year, 95 percent of which are sold in the US. Scope out the details in the press release below and click the image above to see it all laid out in a handy infographic.

Snapshots from Acura NSX prototype run at Mid-Ohio

Acura's achingly slow showing of the new, hybrid NSX saw yet another step yesterday, as we reported late last week. A powder-blue prototype ran ahead of the open-wheelers at the Honda Indy 200 at the Mid-Ohio Sports Car Course. Why show the NSX Prototype at Mid-Ohio? Honda's Ohio research and development center, which has taken the lead on NSX development, is just 60 miles from the track. And as race sponsor, Honda must have figured it would give the spectators a glimpse of the new supercar it's been teasing for the better part of a decade.
With a planned launch in 2015 (special emphasis on the "planned" part, considering the NSX's history), the NSX Prototype shown here sports graphics that "speak to Acura's intention to go racing with the new NSX." That's great news for fans of endurance racing, although it remains to be seen when a motorsports program for the new NSX will get off the ground.
Take a look at the fresh gallery of images, and be sure to head over to our original Mid-Ohio post for the video footage of the NSX Prototype on track.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.