2005 Honda Accord Ex Coupe 2-door 3.0l on 2040-cars

Auto blog

SAE World Congress: Honda FCEV fuel cell stack has cells just 1 mm thin

The only update we have for people who are paying ultra-close attention to the progress of the hydrogen-powered Honda FCEV concept is that we now know how thin the individual cells in the car's fuel cell stack are. Speaking at the 2015 SAE World Congress in Detroit this week, American Honda Motor Company Manager of fuel cell vehicle marketing, Steve Ellis, told AutoblogGreen that the fuel cell stack is now 33-percent smaller and offers a 60-percent improvement in power density. We knew this already. What we didn't know is how Honda got there. Ellis said that these improvements are due in part to a reduction in the size of the fuel cell thickness. Each cell in the stack is one millimeter thick, he said. For everyone who isn't counting the millimeters of this car, here's the broader situation. Honda and the state of California (and others) are working hard on getting H2 infrastructure up can running. "The stations are accelerating as we speak," Ellis said. Three new stations have opened in the last few months and the state has pledged $20 million per year until there are 100 stations in California. Honda has also invested in FirstElement to install stations. The production FCEV will feature a range of over 300 miles and have a three-to-five minute refueling time. The car will launch in Japan in March 2016, with US and European sales starting at some unspecified time after that.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Refreshed 2014 Honda Civic Coupe to bow at SEMA

Honda has announced plans to bring a refreshed, 2014 Honda Civic Coupe to the 2013 SEMA Show, set to kick off on November 5. Honda's struggles with the ninth-generation Civic have been widely publicized, and while the 2013 model year sedan has seen a significant overhaul, the two-door is now getting some additional enhancements for 2014.
Honda has released one teaser image of the Civic Si Coupe to go along with the announcement, but we can discern a few things. The Si Coupe now features a larger rear spoiler, along with a restyled, more aggressive rear bumper, complete with a diffuser. The taillights look smoked, and the wheels look larger than the current Si's alloys.
Besides those details, it looks like we'll be waiting until November 5 to see just what Honda has in store for the Civic. Take a look below for the full press release from Honda.