1995 Honda Accord on 2040-cars

Auto blog

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

NSX, S660, and a 4-motor CR-Z EV that goes like hell

AutoblogGreen Editor-in-Chief Sebastian Blanco was my road dog while visiting Honda's R&D center in Tochigi. Over the course of a long day of briefings, driving demonstrations, and a variety of strange-flavored candies, we saw quite a lot of what the company is planning for the next generation and beyond. Of course, Sebastian and I see the world through very different eyes. So, while he was busy getting details about the FCV Clarity successor, and asking tough questions about electrification (in other words, the important stuff), I was fixating on a tiny, two-seat sports car that will never come to America. Oh, there was an NSX, too. Honda's pre-Tokyo Motor Show meeting really did have plenty to offer for all kinds of auto enthusiasts, be they focused on fast driving or environmentally friendly powertrains. Seb's attendance let me focus on the stuff that's great for the former, while he wrote up high points of the latter. View 15 Photos S660 I joke about salivating over the S660, but honestly I was at least as excited to take a few laps in Honda's Beat encore, as I was to sample the Acura supercar. Conditions for the test drive weren't ideal, however. Two laps of a four-kilometer banked oval is not exactly nirvana for a 1,800-pound, 63-horsepower roadster. Still, I folded all six feet and five inches of my body behind the tiny wheel determined to wring it out. The immersion of the driving experience was enough to make it feel fast, at least. I shifted up just before redline in first gear with the last quarter of the pit lane rollout lane still in front of me. The 658cc inline-three buzzed like a mad thing behind my ear, vastly more stirring than you'd expect while traveling about 30 miles per hour. The S660 is limited to just around 87 mph, but the immersion of the driving experience (note: I was over the windscreen from the forehead up) was enough to make it feel fast, at least. Even after just a few laps, and precious little steering, I could tell that everything I grew up loving about Honda was in play here. The six-speed manual offered tight, quick throws, the engine seemed happiest over 5,000 rpm, and the car moved over the earth with direct action and a feeling of lightness. Sure proof that you don't need high performance – the S600 runs to 60 mph in about 13 seconds – to build a driver's car. I could have used 200 miles more, and some mountain roads, to really enjoy the roadster (though I would have wanted a hat).

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.