2002 Honda Odyssey on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.

Acura NSX GT3 non-hybrid racecar on sale soon

Just over a year ago, Acura debuted the NSX GT3, the FIA GT3-spec racecar based on the automaker's latest and greatest. While it took years for the road car to hit the streets, the NSX GT3 was developed in a relatively short amount of time. This year, the car competed in several races under the factory banner, racking up 50,000 miles and two race victories. Today, Honda and Acura announced the NSX GT3 will go on sale for private teams. Think of the NSX GT3 as a stripped out version of the standard NSX sans hybrid system. The 3.5-liter twin-turbo remains, but, since there are no electric motors up front, all the power is sent to the rear wheels through a XTRAC semi-automatic 6-speed sequential transmission. The chassis is built in Ohio right alongside the regular NSX. The same goes for the engines. The block, heads, valve train, crankshaft, pistons, and dry-sump lubrication system are the same specification as the production car. Final assembly is completed in Italy. This past year, the NSX GT3 competed under the Acura banner in the WeatherTech SportsCar Championship GTD class and the Pirelli World Challenge GT category. In addition to those series, the car is built to compete in the Blancpain GT Series and 24 Hours Nurburgring in Europe, the Super GT GT300 class in Japan, as well as other GT3-spec race series. Different divisions of Honda will be handling global sales, with HPD responsible for the North American market. US pricing hasn't been announced, but converting the European models start at about $545,000. Now we just want to see a lightened, non-hybrid version of the NSX on the street. Related Video: Featured Gallery Acura NSX GT3 View 11 Photos Image Credit: Honda Motorsports Acura Honda Coupe Racing Vehicles Performance honda nsx acura nsx gt3