Find or Sell Used Cars, Trucks, and SUVs in USA

Original Owner Redline Orange 18, 200 Miles on 2040-cars

US $17,133.00
Year:2010 Mileage:18200 Color: REDLINE ORANGE METALLIC /
 Black
Location:

Basking Ridge, New Jersey, United States

Basking Ridge, New Jersey, United States
Transmission:MANUAL CLOSE RATIO 6 SPEED
Body Type:4 DOOR
Vehicle Title:Clear
Engine:2.0 L
VIN: 2HGFA5E54AH701048 Year: 2010
Make: Honda
Model: Civic
Trim: Si REDLINE ORANGE EXTERIOR
Options: Sunroof, CD Player
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Drive Type: FWD WITH LIMITED SLIP DIFFERENTIAL
Listing Type: ORIGINAL OWNER (PRIVATE)
Mileage: 18,200
Sub Model: 4 DOOR MANUAL Si
BodyType: 4 DOOR
Exterior Color: REDLINE ORANGE METALLIC
DriveTrain: FRONT WHEEL DRIVE
Interior Color: Black
Warranty: Balance of factory powertrain warranty
Number of Cylinders: 4
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"METICULOUSLY MAINTAINED BY ORIGINAL OWNER. NEVER ANY ACCIDENTS. NO MODIFICATIONS, SO YOU ARE LOOKING AT A FACTORY OEM STOCK CAR. Honda Factory Warranty on powertrain until 5 years. **SELLER RESERVES THE RIGHT TO END THE AUCTION EARLY**"

I am the original purchaser and owner of this car. It is ONE of my 4 vehicles, and that is the reason for low mileage.
It has been meticulously maintained and kept in garage with all maintenance records.
I have the 3 original keys and key tag.
I have all of the original books and manuals that came with the car.
The car has never been in any accidents or road incidents of any kind.
The only imperfection is a tiny dent on the front fender, where something touched it while parked it in the garage.

Auto Services in New Jersey

Zambrand Auto Repair Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Inspection Stations & Services
Address: 250 42nd St, Bloomfield
Phone: (718) 965-1903

W J Auto Top & Interiors ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Seat Covers, Tops & Upholstery
Address: 2255 Wyandotte Rd Ste B, Pennsauken
Phone: (215) 659-5125

Vreeland Auto Body Co Inc ★★★★★

Automobile Body Repairing & Painting, Used Car Dealers, Automobile Repairing & Service-Equipment & Supplies
Address: 330 Vreeland Ave, Haskell
Phone: (973) 684-1382

Used Tire Center ★★★★★

Automobile Parts & Supplies, Tire Dealers
Address: 1070 Salem Rd, North-Plainfield
Phone: (908) 349-8027

Swartswood Service Station ★★★★★

Auto Repair & Service, Gas Stations
Address: 902 Swartswood Rd, Tranquility
Phone: (973) 383-4345

Sunrise Motors ★★★★★

New Car Dealers, Automobile & Truck Brokers
Address: 430 Industrial Ave Ste 11P, Ridgefield
Phone: (201) 462-9000

Auto blog

Minivan market not what it used to be, but margins make up for it

Thu, 05 Jun 2014



Residual values for last year's minivans are higher than they were in 2000.
Much like the station wagon was the shuttle of Baby Boomer generation, the minivan has been the primary means of transport for Generations X and Y. Just as the boomers abandoned the Country Squire, though, those kids that were toted around in Grand Caravans and Windstars are adults, and they certainly don't want to be seen in the cars their parents drove.

Honda installs 3-minute, fast-fuelling hydrogen fuel station in California

Fri, Mar 7 2014

OK, but let's see how well Honda can control hydrogen refueling temperature in Houston or Buffalo. That's what some pessimists may be saying now that the Japanese automaker has installed a fast-fueling hydrogen station in the oh-so-temperate environs of Torrance, CA. That city is about 20 miles southwest of downtown Los Angeles and a sliver of it actually touches the Pacific Ocean, so we're not talking about wild swings in air temperature here. Honda is calling its fast-refueling platform the MC Fill (we'd expect a lawsuit if it was McFill, even though that'd be clever) and says that filling up takes about 45 percent less time than the typical hydrogen-refueling station. That's because the system monitors the ambient temperature in order to speed up the process. There's more scientific stuff in there - for example, the fact that the MC name comes from the "two key values in a heat transfer equation- 'M' for mass and 'C' for specific heat" - but the long and the short of it is that a hydrogen fuel-cell vehicle can fill up in less than three minutes. That's pretty impressive, despite the distinct lack of vehicles needing to charge that fast today. Honda unveiled its FCEV Concept vehicle at the Los Angeles Auto Show last November. The five-seat vehicle has a range of more than 300 miles, while its fuel-stack power density is about 60 percent higher than its previous version. The production version is due to arrive in the US in 2015. Check out Honda's press release below. Honda R&D Installs Advanced Fast-Fill Hydrogen Refueling Station -- New station on Honda R&D Americas' Torrance, California campus built in anticipation of Honda's next-generation fuel cell electric vehicle, due in 2015 -- Honda-developed hydrogen refueling protocol significantly reduces fill time TORRANCE, Calif., March 3, 2014 /PRNewswire/ -- Preparing for the 2015 introduction of the next Honda fuel cell-electric vehicle (FCEV), Honda R&D Americas has installed a state-of-the-art hydrogen refueling station on its Torrance, California campus. This advanced station will serve as a platform for demonstrating and validating the enhanced hydrogen fueling protocol developed by Honda, named the MC Fill. With the aim of standardizing this new protocol, Honda will make the new research station available to other automakers to further validate the MC Fill protocol's performance and functionality.

Acura NSX will use Cosworth block, plus other neat tidbits

Sat, Aug 15 2015

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.