Ex Manual Coupe 1.8l Cd Moon Roof A/c on 2040-cars

Auto blog

Scion FR-S pitted against oldtimers RX-8 and S2000

There are very few vehicles available today that compare directly with the Scion FR-S and Subaru BRZ twins. A case could be made for the Mazda MX-5 Miata, and possibly even six-cylinder versions of American coupes like the Ford Mustang. Pretty much everything else is either too expensive or is powered by the wrong set of wheels.
The boys from EverydayDriver on YouTube decided the only fair way to judge the inherent qualities of the Toyobaru twins was to pit them against two standard-bearers of years past: The Honda S2000 and Mazda RX-8. Neither of these cars is an exact matchup, with the Honda boasting a convertible top and the RX-8 offering more practicality via a rear seat and two reverse-opening doors for easier access. What they do offer, however, are similar performance stats and proven reputations for excellent handling.
None of this talk answers the real question, though: Which one wins the comparison test? Scroll down to watch the video, and be prepared for something of a surprise conclusion.

Honda flaunts freshened 2014 Civic Coupe at SEMA

Honda took the wraps off its 2014 Civic Coupe (red car pictured above) and 2014 Civic Si (gray car in the gallery below) at SEMA today, revealing a mid-cycle refresh for each model. The standard Civic coupe benefits from several cosmetic enhancements, while the Civic Si gets the bulk of its improvements under the hood - precisely where the enthusiasts want them.
The best-selling Civic Coupe sports a new front fascia that is "fun and sporty," says the automaker. The more aggressive snout is a step in the proper direction, as its new shape and exclusive grille design gives the two-door a distinctive appearance that sets it apart from its sedan sibling. The rear end follows the same design language, as the lower portion of the urethane bumper gains some character - its smooth surface has been resculpted and recontoured. Newly available 18-inch wheels complete the exterior transformation.
The 2014 Civic Si benefits from a larger spoiler and new wheels, but the big news is in the powertrain. Honda has massaged the 2.4-liter i-VTEC engine and opened up the exhaust system. As a result, output climbs to 205 horsepower (up from 201) and torque increases to 174 pound-feet (up from 170). The power gains aren't extraordinary, but they should allow the coupe to hit 60 miles per hour from a standstill in about six seconds flat and still return over 30 mpg on the open road. Scroll down for the official release.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.