2019 Honda Civic Ex on 2040-cars

Auto blog

Honda recalling 748k Odyssey and Pilot models over airbag concern

American Honda today announced a recall of approximately 748,000 Odyssey and Pilot models due to faulty airbag concerns. The vehicles in question are Odyssey minivans from the 2011 to 2013 model years and Pilot crossovers from the 2009 to 2013 model years.
According to a statement from Honda, driver's side airbags in the affected vehicles were potentially assembled without some of the rivets that secure the bag's plastic cover. Because of this, the airbag may not deploy properly in the event of a crash, leading to further occupant injury. As of this writing, no injuries have been reported in conjunction with this issue.
Honda will begin officially notifying owners via mail in mid-February. The automaker urges customers to take their vehicles to an authorized dealership, where vehicles will be inspected and, if necessary, repaired. In lieu of waiting for the snail mail approach, owners may also visit www.recalls.honda.com or can contact the automaker directly at 1.800.999.1009 and select option four.

Japanese automakers kick in $800k for new charging-station company

Cynics may say that gathering $800,000 (total) from four of Japan's largest automakers is merely a rounding error. Still, Toyota, Nissan, Honda and Mitsubishi, along with the Development Bank of Japan, are putting those funds to good use. So, that's something. Last week, those five entities officially founded Nippon Charge Service LLC. The company was established to promote plug-in vehicle charging installations across Japan and the automakers seeded it with 80 million yen, or about $786,000 US. Those funds will be used to help business owners deploy charging stations at convenience stores, highway-side locales and other locations that will make it easier for plug-in vehicle drivers (of Toyotas, Hondas, Mitsubishis and Nissans, obviously) to get their juice. The automakers first announced they'd collaborate last year, when they said they'd work with the Japanese government to more than triple the country's publicly accessible chargers to about 17,000 units. No targets were disclosed as far as how many charging stations would be deployed this time out, but, in a move similar to the EZ Charge system in the US, Nippon Charge Service will also have universally-accepted charging cards available by the end of the year to drivers all of those brands' plug-in vehicles to make the charging process a little more seamless. Check out Honda's press release below. Japan Automakers Advance Electric Charging Infrastructure with New Company, Nippon Charge Service -Established to help build charging infrastructure for electric-powered vehicles (PHVs, PHEVs and EVs)- Toyota Motor Corporation Nissan Motor Co., Ltd. Honda Motor Co., Ltd. Mitsubishi Motors Corporation Development Bank of Japan Inc. TOKYO, Japan, May 30, 2014 - Toyota Motor Corporation, Nissan Motor Co., Ltd., Honda Motor Co., Ltd., and Mitsubishi Motors Corporation jointly established a new company, Nippon Charge Service, LLC, on May 26 to promote the installation of chargers for electric-powered vehicles (PHVs, PHEVs, EVs). The goal is to help build a charging network that offers more convenience to drivers in Japan. The new company will promote the installation of chargers, for the good of society and to expand the use of electric-powered vehicles. Related industries are also expected to benefit. Development Bank of Japan Inc.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.