2012 Honda Accord Sdn 4dr I4 Auto Lx Low Miles Sedan Automatic 2.4l Dohc on 2040-cars

Auto blog

Honda recalls small number of 2016 CR-V models for airbags

Thought you'd heard the last bit of news regarding exploding airbags from Takata? Think again. Honda has issued a recall for the 2016 CR-V to replace driver-side front airbag modules. Fortunately, only 515 vehicles are covered by this recall, and only 30 affected models were actually in the hands of consumers. And, if you own a 2016 CR-V and haven't gotten a phone call from Honda, you're apparently in the clear. On October 10, 2015, an airbag inflator made by Takata ruptured in Monclova, Mexico, while being tested. Two days later, Takata notified Honda and the National Highway Traffic Safety Administration, prompting this recall. According to Honda's official announcement, though, this faulty inflator is not believed to be the same issue that caused automakers around the globe to recall 19.2 million (and counting) vehicles to replace defective airbag modules that were also made by Takata. Whether that's comforting or not, we'll let you decide. We've included both the official recall notice from NHTSA and the statement from Honda below. Here's hoping the faulty inflator that caused this recall was nothing more than a single defective part. Related Video: RECALL Subject : Driver Side Air Bag Inflator may Rupture Report Receipt Date: OCT 29, 2015 NHTSA Campaign Number: 15V714000 Component(s): AIR BAGS Manufacturer: Honda (American Honda Motor Co.) SUMMARY: American Honda Motor Company, Inc. (Honda) is recalling certain model year 2016 CR-V vehicles manufactured October 12, 2015, to October 19, 2015. The metal housing surrounding the driver's air bag inflator in these vehicles may have been manufactured incorrectly. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Honda will notify owners, and dealers will replace the driver side frontal air bag module, free of charge. The recall is expected to begin December 4, 2015. Owners may contact Honda customer service at 1-800-999-1009. Honda'a number for this recall is JV9. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement by American Honda Regarding Driver Front Airbag Module Recall: 2016 Honda CR-V Oct 30, 2015 - TORRANCE, Calif.

Honda recalls more than 750,000 vehicles to fix faulty seat air bag sensor

DETROIT — Honda is recalling more than three quarters of a million vehicles in the U.S. because a faulty sensor may cause the front passenger air bags to inflate when they're not supposed to. The recall covers certain Honda Pilot, Accord, Civic sedan, HR-V and Odyssey models from the 2020 through 2022 model years, as well as the 2020 Fit and Civic Coupe. Also included are the 2021 and 2022 Civic hatchback, the 2021 Civic Type R and Insight, and the 2020 and 2021 CR-V, CR-V Hybrid, Passport, Ridgeline and Accord Hybrid. Affected models from the Acura luxury brand include the 2020 and 2022 MDX, the 2020 through 2022 RDX and the 2020 and 2021 TLX. Documents posted Tuesday by the U.S. National Highway Traffic Safety Administration say that the front passenger seat weight sensor may crack and short circuit, and fail to turn off the air bag as intended. The sensors are required to disable the air bags if children or small adults are in the seats. If that doesn't happen, it increases the risk of injury. Dealers will replace the seat sensors at no cost to owners. Owners will be notified starting March 18. Honda says in documents that it has 3,834 warranty claims but no reports of injuries or deaths from the problem between June 30, 2020 and Jan. 19 of this year. Featured Gallery 2020 Honda CR-V Hybrid View 40 Photos Green Recalls Acura Honda

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.