2013 Honda Accord Ex-l on 2040-cars

Auto blog

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3

Honda recalls 2.23 million vehicles to replace Takata inflators

The Basics: Honda and Acura will recall 2.23 million vehicles in the US. The affected models are: 2005-2012 Acura RL 2007-2011 Honda CR-V 2007-2016 Acura RDX (early production MY 2016 vehicles only) 2007-2014 Honda Ridgeline 2009-2014 Honda Fit 2009-2014 Acura TL 2010-2014 Honda FCX Clarity 2010-2014 Honda Insight 2010-2013 Acura ZDX 2011-2015 Honda CR-Z 2013-2016 Acura ILX (early production MY 2016 vehicles only) The Problem: These vehicles have Takata's PSDI-5 airbag inflator on the driver's side, and this part could rupture if the airbag deploys. Injuries/Deaths: There are no reported ruptures of the PSDI-5 inflator in Honda or Acura vehicles. However, Takata's exploding components have links to at least 10 deaths worldwide because they can spray shrapnel at occupants. The Fix: Honda and Acura dealers will replace the inflators with parts from an alternative supplier. If You Own One: The repairs will begin this summer. Owners will receive a letter notifying them about the recall within 60 days and will get a second message when the parts are available. The company will prioritize older models in high-humidity regions first because these inflators would be most likely to rupture. More Information: Honda and Acura have now recalled 8.51 million vehicles in the US to replace their driver or passenger side inflators. This latest expansion came in the wake of a driver death from an airbag rupture in a Ford Ranger. Ford and Mazda already enlarged their safety campaigns. The National Highway Traffic Safety Administration also announced Audi, BMW, Daimler Vans, Mercedes-Benz, Saab, and Volkswagen would have recalls for this issue, too. Statement by American Honda Regarding Nationwide Recall of Certain Takata PSDI-5 Driver Front Airbag Inflators Feb 3, 2016 - TORRANCE, Calif. Approximately 2.23 million Takata PSDI-5 driver front airbag inflators will require replacement in Honda and Acura vehicles in the U.S. No PSDI-5 inflator ruptures have been reported in Honda or Acura vehicles Takata inflators will be replaced with parts from an alternative supplier with repairs beginning in the Summer of 2016 Based on a recent Defect Information Report (16E-005) from the airbag inflator supplier, Takata, Honda will conduct a national recall (16V-061) of approximately 2.23 million Honda and Acura vehicles in the United States to replace, free of charge to vehicle owners, the PSDI-5 Takata driver front airbag inflators installed in those vehicles.

Honda recalling 748k Odyssey and Pilot models over airbag concern

American Honda today announced a recall of approximately 748,000 Odyssey and Pilot models due to faulty airbag concerns. The vehicles in question are Odyssey minivans from the 2011 to 2013 model years and Pilot crossovers from the 2009 to 2013 model years.
According to a statement from Honda, driver's side airbags in the affected vehicles were potentially assembled without some of the rivets that secure the bag's plastic cover. Because of this, the airbag may not deploy properly in the event of a crash, leading to further occupant injury. As of this writing, no injuries have been reported in conjunction with this issue.
Honda will begin officially notifying owners via mail in mid-February. The automaker urges customers to take their vehicles to an authorized dealership, where vehicles will be inspected and, if necessary, repaired. In lieu of waiting for the snail mail approach, owners may also visit www.recalls.honda.com or can contact the automaker directly at 1.800.999.1009 and select option four.