With Asanti Rims Value At $12,747 11m On Them on 2040-cars

Auto blog

GM recalls 330,000 fullsize trucks for airbag replacement

General Motors has announced a recall of 330,198 fullsize pickups in the US in the aftermath of the announcement made on May 19 that doubled the number of vehicles being called in to replace Takata's defective airbag inflators. That announcement expanded the nationwide recall to an estimated 33.8 million vehicles in the US. Heavy Duty versions of the 2007 and 2008 Chevrolet Silverado and GMC Sierra are included in GM's move, for the purpose of replacing the passenger airbag inflators. The announcement made by the National Highway Traffic Safety Association cited long-term exposure to moisture as a possible cause of the inflator issues. GM says it isn't aware of any problems with the recalled pickups due to moisture, nor has it had any reports of crashes, injuries, or fatalities, and has not received any complaints. GM will notify owners, who can then take their trucks to the dealers to have them repaired free of charge. You'll find a statement from GM and the recall notice from NHTSA below. Related Video: General Motors Statement General Motors is recalling 330,198 2007 and 2008 model year full-size Chevrolet Silverado heavy duty and GMC Sierra heavy duty pickup trucks in the U.S. to replace the passenger air bag inflators manufactured by TK Holdings Inc. (Takata). This recall implements Takata's air bag inflator equipment recall announced on May 19, 2015 (NHTSA recall number 15E-041). GM is not aware of any humidity-related ruptures in Takata air bag inflators in any GM-badged vehicles in the field and knows of no crashes, injuries, fatalities or complaints regarding air bag performance in these vehicles. Including Canada and exports, the total number of vehicles being recalled is 374,715. Population breakdown: United States 330,198 Canada 39,630 Exports 4,887 Total 374,715NHTSA RECALL NOTICE: Report Receipt Date: MAY 28, 2015 NHTSA Campaign Number: 15V324000 Component(s): AIR BAGS Potential Number of Units Affected: 330,198 Manufacturer: General Motors LLCSUMMARY: General Motors LLC (GM) is recalling certain model year 2007-2008 Chevrolet Silverado 2500HD and 3500HD trucks manufactured November 28, 2006, to August 29, 2008, and 2007-2008 GMC Sierra 2500HD and 3500HD trucks manufactured November 27, 2006, to August 29, 2008.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles