We Finance! 2010 Gmc Yukon Denali Awd Power Sunroof Navigation Bose on 2040-cars

Auto blog

GMC to get own model not shared with Chevy?

For years, GMC has existed as a brand without a single unique product, reconstituting Chevrolet trucks, SUVs and crossovers with more frosting in exchange for a few extra dollars. The Sierra is a Silverado, the Acadia a Traverse, and the Terrain an Equinox, although admittedly the latter pair are visually differentiated to a significant degree.
GMC could be set to expand beyond its Chevy-based roots, though. During last week's Detroit Auto Show press days, GM's product boss Mark Reuss was asked whether there'd ever be a GMC that wasn't taken from Chevy. "Oh, yes, you will," Reuss told the media. "The health of GMC is astonishingly good from a consideration standpoint." Reuss wouldn't elaborate on what the model could be, although we're quite happy to make some guesses. GMC has its bases fairly well covered, with a mid-size and full-size crossover, as well as a mid-size, full-size and HD pickup. We doubt GMC will be building a family sedan, sports car, or hatchback, so really, the only place we can see the brand going is into a smaller crossover.
Automotive News points out that the most recent small GMC showcar, the 2010 Granite concept (shown above), won't see production according to General Motors. That vehicle likely would have rode on GM's compact vehicle architecture, known internally as Gamma II, which underpins the Chevy Spark and Sonic, as well as the Buick Encore (and its overseas Opel/Vauxhall/Chevy counterparts).

GM Issues Four New Recalls For 90,000 Vehicles

One day after releasing an internal report that found a pattern of "incompetence and neglect" within the company, General Motors announced four more recalls that affect 89,126 vehicles. One of the recalls affects 31,520 vehicles that may contain a defect that could prevent airbags from deploying in a car accident. GM said it was aware of at least one crash in which a vehicle occupant sustained an injury because the airbags didn't deploy when they should have. The company said it was aware of other crashes that were similar in nature, but it is not yet known whether they're related to the condition, in which the shorting bar inside the driver's airbag may occasionally contact the airbag terminals. If the car and terminals are touching each other in a crash, the bags will not deploy. Vehicles from the 2012 model year are affected by the problem, and they include the Buick Verano, Chevrolet Camaro, Cruze and Sonic. GM has conducted two previous recalls for this condition involving 7,116 cars. GM is also recalling 57,512 models of the 2014 Chevrolet Silverado 1500, 2014 GMC Sierra 1500 and 2015 Silverado HD, Tahoe and Surburan, as well as the 2015 GMC Sierra HD, Yukon and Yukon XL models because their radio control modules may not work, and thus prevent certain audible safety warnings. Certain models of the 2013-2014 Chevrolet Spark and 2013 Buick Encore are being recalled for a different airbag problem, which could prevent airbags from deploying properly during a crash. And 33 2014 Chevrolet Corvettes are being recalled for yet another airbag problem, in which an internal short circuit could disable the airbags. So far in 2014, General Motors has issued 34 separate recalls that affect approximately 15.9 million vehicles – more than the company has sold in the past five years combined. GM Announces Four Recalls DETROIT – General Motors today announced three safety recalls and one non-compliance recall, all of which were reported to the NHTSA on Thursday, June 5, 2014. In all cases, customers will receive letters from GM letting them know when they can bring their vehicles into a dealership, where all repairs will be performed free of charge and courtesy transportation would be provided as needed.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.