2014 Gmc Yukon Denali on 2040-cars

Auto blog

GMC Hummer EV First Drive Review | True supertruck, for better and for worse

Right from the start, the 2022 GMC Hummer EV has been advertised with superlatives, mostly in reference to its specifications. GMC has even called it a "supertruck" in its own materials. And while we've received a taste of the truck before, only now have we finally got our hands on the production-spec model, and had the opportunity to drive it both off-road and on the street. What we've found is that the Hummer EV is undoubtedly a supertruck, much the same way that a Ferrari or a Lamborghini is a supercar. It totally delivers on its incredible capabilities, but there are compromises. And they're worth being aware of before plunking down the more than $100,000 a first-year Hummer will run you. That six-figure truck is the version we tested, the Edition 1, which actually rings in at $112,595. It's the only version in production for now, with lower trims coming in the next couple years. It's sold out, but many of the features will be available on the next highest trim level, the EV 3X. Among those features are the three motors, torque vectoring, “Watts To Freedom” launch mode, four-wheel steering, removable glass roof panels, 35-inch tires, Super Cruise, power rear window and MultiPro tailgate. In other words, although you can literally no longer order an Edition 1, you can still order a Hummer EV with nearly the same specification. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. We'll start where most owners probably will: mashing the throttle. No one can resist seeing what 1,000 horsepower and 1,200 pound-feet of torque will feel like. It's even a tad more torque in Watts To Freedom mode, which preemptively runs the cooling system to enable the additional twist. That mode allows the Hummer to hit 60 mph in 3 seconds, and the drama is dialed up with visual, audible and haptic cues. But even without engaging launch mode, the Hummer EV impresses and delights with its acceleration. In addition to pinning you to the seat, the entire truck squats in an exaggerated fashion. It's absurd, especially considering the truck's curb weight that surpasses a truly astounding 9,000 pounds. ThatÂ’s several hundred pounds more than the heaviest GMC Sierra HD 3500 diesel dually. Of course, that weight, as well as the nature of electric motors, means the party starts to calm down as the speed increases. The weight is noticeable in other areas, too.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GM warning 800,000 owners that their cars may need oil changes more frequently than they say

The days of changing your engine oil every 3,000 miles are long gone thanks to most cars having automatic oil monitoring systems, but about 800,000 General Motors vehicles apparently have incorrect monitoring software that is leading to premature engine component wear. According to Autoweek, certain 2010-2012 Buick LaCrosse, Regal, Chevrolet Equinox and GMC Terrain models equipped with 2.4-liter four-cylinder engines could be going too long in between oil changes resulting in a higher-than-normal number of warranty claims for the engine's balance chain. The balance chain links the balance shaft to the crankshaft, and a worn one can produce higher noise levels.
As a fix, GM dealers will be reprogramming the software for the monitors in an effort to reduce the interval between oil changes, which varies based on driving habits and conditions. Through February 2015, the software update will be done at no cost to vehicle owners, but since this is not a recall, after that point, it will be up to the discretion of dealers as to whether or not they will charge for the service. What isn't immediately clear is whether GM plans on giving assistance to out-of-warranty customers who are experiencing engine issues from the worn chain.