2009 Gmc Yukon Xl Denali Fully Loaded Navigtion Texas Clean Carfax Backup Camera on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Trademark application points to evolution of new Hummer EV logo

A trademark application has revealed yet another evolution of the logo expected to adorn GMC's new Hummer EV pickup truck, bringing back the big "H" badge utilized on the H2 and H3 model lines of the expanded SUV lineup's heyday.  The image included with the filing depicts a logo that should be familiar to Hummer fans (or really any American who left their house between 2003 and 2010), with "EV" supplanting the old numerical model indicator. The "Hummer" and "EV" typeface appears to be a direct lift from a filing that surfaced back in April.  This should provide some comfort to folks who are fans of the idea of a future-proofed, all-electric pickup, but want something that embodies the charisma and road presence of the models sold in Hummer's now-deceased, not-so-environmentally-spectacular incarnation. While we don't yet know really any details of the new all-electric SUV, we do know it will be sold via GMC dealers, meaning the revived nameplate will not bring the rest of the Hummer brand along with it.  We haven't really seen much of the new truck, save for teasers and hints here and there. Even the "reveal" back in June only gave us a vague, big-picture look at the truck's silhouette, and various companion images and videos have hinted at features such as a removable roof assembly.  The truck’s general shape is off-road oriented with squared-off, sharp lines tracing the entire silhouette. Its big, knobby tires and blocky wheels are clear indicators of what GM was aiming for with this electric pickup. As for the SUV, comparisons to the Ford Bronco four-door will be inevitable. If our eyes are picking up the scale of this photo correctly, though, the Hummer SUV appears to be a slightly larger vehicle than the four-door Bronco is. Although, the wheelbase for the SUV is shorter than that of the Hummer truck. ThatÂ’ll help it off-road. Those small bumpers and short overhangs along with the bumper cutouts should be hugely beneficial to approach and departure angles, as well. GMCÂ’s shots of the Hummer in the studio are equally as revealing. We can see what looks to be an intense front skid plate and two big tow hooks. In addition to the off-road gear, GMC has allowed a look at the frunk. The front “grille” is one piece with the hood of the truck, so the whole assembly pulls up. That makes for what appears to be a very easy-to-load front trunk compared to other EVs that force you to lift items up and over the front of the car.

GM recalling 521,817 cars in two campaigns

General Motors is issuing two, separate recalls covering a total of 521,817 vehicles worldwide. The larger campaign covers 468,887 units of the 2011-2012 Chevrolet Malibu. Specifically, 437,045 of these are in the US, and the rest are outside the country. In these sedans, a steel cable that connects the seat belt to the vehicle can fatigue and separate. GM knows of 36 claims about the problem but only one minor injury. According to The Detroit News, this happened when a taxi driver hit his head. To fix things, dealers will replace the "outboard lap mounting bracket," which will move the tensioner rearward. They'll also inspect and if necessary replace the steel cable and lap pretensioner. In the second campaign, 52,930 examples the 2015 Chevy Colorado and 2015 GMC Canyon have seat frame attachment hooks that were installed incorrectly during assembly. GM hasn't received any reports of crashes, injuries, or fatalities about this problem. Dealers will inspect the affected trucks and repair as necessary. GM spokesperson Alan Adler told Autoblog that he didn't yet have a specific date when affected owners would receive official mailings about either of these recalls. GM Statement General Motors is recalling 48,309 2015 model year Chevrolet Colorado and GMC Canyon midsize pickup trucks in the U.S. because certain seat frame attachment hooks were not properly attached to the vehicle body during assembly. Dealers will inspect the potentially affected seats for proper installation and repair if necessary. GM knows of no crashes, injuries or fatalities related to this condition. The total vehicle population of the recall is 52,930 including 4,620 vehicles sold in Canada. General Motors is recalling 437,045, 2011-2012 model year Chevrolet Malibus in the U.S. because the flexible steel cable that connects the safety belt to the vehicle can fatigue and separate over time as a result of occupant movement in the seat. Dealers will replace the outboard lap mounting bracket to relocate the tensioner slightly rearward. Dealers will inspect the cable and, if necessary, replace the lap pretensioner. GM knows of 36 claims, no crashes or fatalities and one minor injury reportedly related to the condition. The total vehicle population of the recall is 468,887 including Canada, Mexico and exports.