2008 Gmc Yukon Xl 1500 Denali on 2040-cars

Auto blog

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

5 classic trucks and their polarizing modern revivals

EVs are helping eliminate Detroit's gas-guzzling problem. Some revivals of gas-powered classics are getting the EV treatment.  But not every revived model looks exactly like its original counterpart. We're in a new era of hulking Detroit metal, and you can thank EVs. Americans can't get enough of their big, beefy trucks and SUVs. But for many years, some of the biggest gas guzzlers fell out of fashion as gas prices rose and emissions regulations tightened. But in the past few years, some of the most iconic American truck nameplates have been brought back to life with electric motors, like the GMC Hummer. In other cases, as with the Ford Bronco, improvements in engine technology and more interest in rugged adventure vehicles made a gas-powered revival possible. Even some revivals that started as gas-powered, like the Chevy Blazer and the Jeep Wagoneer, are now getting electrified spinoffs. (Even if they don't always look quite as sleek as their original inspiration.) Here are side-by-sides of five classic American trucks and their modern counterparts. The Jeep Wagoneer 1975 Jeep Wagoneer and 2024 Electric Jeep Wagoneer SStellantis After a long wait, Jeep released its revival of the classic Wagoneer and Grand Wagoneer in 2020. Starting later this year, an electric version of the luxury Jeep SUV will join the Wagoneer lineup. The Chevrolet Blazer A 1973 Chevrolet Blazer and a 2024 Chevrolet Blazer EVGetty Images, General Motors The Chevrolet Blazer was first rebooted in 2019 as a sporty family SUV. The modern Blazer shares zero resemblance to its boxy, off-roading older sibling, but it has still managed to become one of Chevy's more popular SUVs in recent years. The Blazer EV came later, and was one of the first models GM built on its new Ultium battery platform. The Hummer A Hummer H2 and the 2023 Hummer EV pickup truckGetty Images, General Motors Once the poster child for Detroit's big, bad gas guzzlers, the Hummer got new life as an electric pickup truck in 2021. The Ford Bronco A 1971 Ford Bronco and a 2022 Ford BroncoFord Motor Co. After a rouge group of engineers and designers inside Ford spent years trying to breathe life back into the Blue Oval's boxy off-roader, the Ford Bronco was finally resurrected in 2020 amid a rise in popularity for rugged adventure vehicles. The Ford Ranger 1985 Ford Ranger and a 2024 Ford RangerFord Motor Co.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck