1998 Gmc Sonoma Sl Standard Cab Pickup 2-door 2.2l on 2040-cars

Auto blog

2019 GMC Sierra Denali Drivers' Notes Review | Half measures

Associate Editor Reese Counts: This truck feels a full generation behind the competition. It's a half measure that feels more like a mid-cycle refresh than a whole new truck. There are a few high points: the 6.2-liter V8 is great (if thirsty) and the bed is wider than anything else in the class. The tailgate, too, is nifty, though some might write it off as a novelty. I also dig the tech, particularly the infotainment system and heads-up display. Ram might brag about its giant touchscreen, but I think I actually prefer the GMC's user interface. The rest can be summed up with a series of shoulder shrugs. The Sierra finally looks different than a Silverado, but I wouldn't call it handsome. The interior is spacious, but I'd knock the design and materials in a $45,000 truck, much less one approaching $70,000. It's not Toyota Tundra levels of terrible, it's just plain, cheap, and not nearly as space efficient as the Ram. It feels like GM's not even trying to move the needle with this truck. The more time I spend behind the wheel, the less I like it. Assistant Editor Zac Palmer: I got to spend a lot of seat time in this 2019 GMC Sierra Denali, and I came away generally unenthused by GM's most luxurious truck. We harp a lot about how expensive pickup trucks are these days, and this one's near $70,000 price tag is just the same. When you step inside a similarly-specced Ram, it feels like it's worth its price. When I step out of a Silverado and into a more expensive Sierra, I want to feel like it's money well spent. This Sierra Denali does not. Beyond the leather seats and a few small pieces of wood trim, it's hard, black plastic galore. What makes it all the more frustrating is that GM has most of the tech and features it needs (solid infotainment, 360-degree camera, wireless phone charging and the rear camera mirror is genuinely awesome). The presentation just comes off as dated from the start. It's a shame, because I have a strange affinity for how this truck looks from the curb. The sharp angles, brash styling and "tough truck" attitude is appealing to me. I like stomping on the gas and letting the 6.2-liter torque monster under the hood loose. But man do you pay the price for using that engine. Over a few hundred miles of driving I ended at a dismal 15 mpg reading on the trip computer — the saddest part of this was knowing these were mostly highway miles.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.