2014 Gmc Sierra 3500 Denali on 2040-cars

Auto blog

2015 Chevy Silverado, GMC Sierra can tow up to 12,000 pounds

Think back to the launch of the 2014 Chevrolet Silverado. At the time, General Motors happily trumpeted that its fullsize pickup could tow up to 11,500 pounds when properly equipped - impressive stuff, no doubt. But now, revised tow rating practices have been put into place, called SAE J2807. And with these new methods of testing, GM can now officially rate both the Silverado and its GMC Sierra twin as being able to tow up to 12,000 pounds.
Of course, not all Silverado and Sierra models are capable of this feat. In fact, because of SAE J2807, most of the truck models have actually had decreases in tow ratings from the 2014 to 2015 model year. For example, a 2014 Silverado Crew Cab with the 5.3-liter V8, 5.7-foot box and 3.73 rear axle was rated at 11,200 pounds in 2014, but has since been reduced to 10,800 in 2015. Same goes for the Sierra.
But for 2015, both the Silverado and Sierra can be had with a more powerful 6.2-liter V8, as well as a Max Trailering Package that includes a 9.76-inch rear axle, heavy-duty rear springs, revised shock tuning, improved cooling and a new trailer brake controller. There are also four- and seven-pin, bumper-mounted connectors, a trailer hitch (duh), and a G80 locking rear differential. This configuration, with either model, is the only way you can actually tow 12,000 pounds.

GMC Terrain adds AT4 trim, completing the set

"AT4 all of the things!" is GMC's new rallying cry, as the brand has announced that the off-road-themed trim level is coming to the GMC Terrain midsize SUV. The Terrain will join the just-announced 2021GMC Yukon and the 2021 GMC Canyon midsize pickup, both of which add an AT4 variant for the first time. The model designation was introduced on the Sierra full-size pickup for 2019, and spread to the Sierra HD and to the Acadia three-row crossover for 2020. AT4 content, however, varies widely by model. In the Sierra full-size pickup, the trim level brings a full slate of off-road gear including a two-inch suspension lift, a two-speed transfer case for the 4WD system, a locking rear differential, hill-descent control, Rancho shocks, skid plates, off-road tires, and more. The Acadia AT4, meanwhile, includes little more than standard AWD, black wheels and exterior trim, and all-terrain tires. It sounds like the Terrain AT4 will be closer to the Acadia in execution, with GMC promising a black-chrome grille and exterior design elements plus "confident capability and advanced technology." Hmm. The GMC Terrain AT4 doesn't arrive until the 2021 model year, which means this fall, so more specifics, including pricing, are still to come. But GMC couldn't wait to show the Terrain AT4, which completes the AT4 family photo seen above. Related Video:    

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.