2005 Gmc Sierra Duramax Pick Up on 2040-cars

Auto blog

GM able to add diesel to half-ton pickups if market demands it

A few years ago, the trend in half-ton pickup trucks was ultra-luxurious trims, often with the words "limited" or "platinum" tacked on after the model name. That was well and good, but we like this latest fad a lot more - diesel engines. First, Ram came to bat with a 3.0-liter, V6 turbodiesel for the 1500, then Nissan announced that the next-generation Titan would be getting an eight-cylinder Cummins diesel.
Now, word is coming in from AutoGuide that General Motors can, if it so chooses, drop a diesel engine into its light-duty trucks. The plot thickens, though, as it turns out that said diesel would be the same one Ram is using for its truck. According to AG, that engine comes from VM Motori, which GM owns a sizable chunk of. Therefore, GM can snag the 3.0-liter, V6 diesel for its trucks just as easily, if not more easily, than Ram.
If it's so easy for the Detroit-based manufacturer to access the engines, why not offer the a diesel-powered Sierra and Silverado from the start, then? According to GM spokesman Tom Wilkinson, The General doesn't seem so confident in a diesel pickup outside of its HD offerings. According to Wilkinson, the cost-benefit ratio doesn't line up for customers, thanks to both the impact on the truck's sticker price and the higher price of diesel, in general (the national average for a gallon of diesel is 43 cents more than a gallon of 87-octane unleaded).

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

2022 GMC Hummer Edition 1 weighs 9,063 pounds

From the beginning, the Hummer line of vehicles has been synonymous with the phrase, "absolute unit." The M998 Humvee turned to civilian use as the Hummer H1 came with a curb weight of 7,560 pounds depending on configuration. The much more urbane Hummer H2 didn't sacrifice much of those gains, putting about 6,615 on the scales. Let us not forget that the behemoth gravitational pull and square-jawed mass were what every Hummer buyer wanted. So, starting with the brand values and customer demand, and adding the fact that electric vehicles are substantially heavier than their ICE counterparts, no one should be surprised that the 2022 GMC Hummer Edition 1 weighs 9,063 pounds. That's just one of the substantial figures GMC included in a self-certification filing submitted to the U.S. Environmental Protection Agency, the document rooted out by Car and Driver. Last year GMC told us the Hummer would weigh 9,046 pounds, which proves again the Freshman 15 (or 16) is unavoidable.  Loaded up with humans and their accessories, the truck's gross vehicle weight rating (GVWR) comes in at 10,550 pounds. It takes a few other big numbers to keep that kind of tonnage on the go. The Ultium battery weighs 2,923 pounds. With a 617-amp-hour capacity at 400 volts, total capacity comes in at 246.8 kWh, specific energy at 158 Wh/kg. Usable capacity is about 85% less, at 212.7 kWh. For the time being, these numbers put every other pack in a production vehicle in the shade. That gargantuan chemical plant in the Hummer's floor powers a 329-mile range the same way a giant fuel tanks feed a truck that gets 8 miles to the gallon. The miles per gallon equivalent figures GMC submitted to the EPA are 51 MPGe city, 43 MPGe highway, 47 MPGe combined. Motor Trend questioned whether GM applied the correction factor used for window sticker numbers; if not, the standard 0.7 correction drops the MPGe specs to 36 city, 30 highway, and 33 combined. However, trucks with a GVWR beyond 8,500 pounds don't need to display fuel economy figures on their window stickers, so don't expect to see any such details on dealer lots. For comparison, the Rivian R1T Launch Edition weighs about 7,000 pounds, and fits a 128.9 kWh battery good for an estimated 314 miles estimated at 70 MPGe.