1996 Gmc Sierra on 2040-cars

Auto blog

GMC Syclone spools up a storm on Jay Leno's Garage

A storm was brewing on American roads in the early 1990s. That's when Detroit's automakers were producing some of the hottest performance trucks ever devised – models like the Ford Lightning, GMC Typhoon, and its flyweight pickup sibling, the GMC Syclone. Jay Leno just happens to have one of the latter in his garage, and took it out to showcase in this latest video segment. The Syclone was an exercise in absurdity, and could not only trounce any other pickup on the road, it could outrun anything else GM made and just about anything else on the road – beating Ferraris and Porsches off the line. In a pickup, for crying out loud. The kicker is that its engine wasn't such a monster, either: under the hood sat a 4.3-liter turbocharged V6 pumping out what would seem by today's standards to be an adequate 280 horsepower and 350 pound-feet of torque. Even the smaller of the EcoBoost V6s available in today's Ford F-150 produces more than that. But in a lightweight, compact pickup, those figures were enough to propel the Syclone to 60 in 4.3 seconds and run the quarter-mile in 13.6 seconds. Long before the dune-jumping Ford F-150 SVT Raptor or even the Viper-powered Dodge Ram SRT-10, GM made fewer than 3,000 Syclones based on the compact Sonoma (sister to the Chevy S-10) and another 4,700 of the Typhoon, which was mechanically similar but more practical (albeit heavier) wagon bodywork from the Jimmy. But as Jay aptly points out, the Syclone was the one you wanted. Scope it out in the ten-minute video clip above.

Daily Driver: 2015 GMC Canyon

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, featuring impressions from the staffers that drive them every day. Today's Daily Driver features the 2015 GMC Canyon, reviewed by Seyth Miersma. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. VIDEO TRANSCRIPT [00:00:00] Hey, guys. This is Seyth with Autoblog, and I'm here in the 2015 GMC Canyon pickup truck. The version I'm in is about as bare bones as this truck gets. We've got a convenience group package, which means I have things like a remote lock and unlock. I've got a spray-in bed liner and then I've got the very tiny but still useful infotainment system, which allows for things like hooking up your phone, [00:00:30] Bluetooth streaming music from my iPhone to the sound system, things of that nature. Really there's not a whole lot here. What you see is what you get. The interior is pretty basic. We've got gray plastic. We've got black plastic. We've got these gray cloth seats which I actually kind of dig. They've got a cool shape. It's comfortable in terms of the interior but it's certainly not fancy at all. You go back and look into the segment and you look at offerings from Nissan and Toyota and you'll see that this really feels pretty [00:01:00] plush certainly compared to their base level trucks. We've got the 2.5-liter 4-cylinder in it. Still makes 200 horsepower and 191 pound feet of torque. It doesn't feel completely slow but I'll admit that some of that has to do with the fact that I have a six-speed to play around with. I'm revving it up a little bit higher than you normally would with a pickup truck. It's not fast. It doesn't mean that it's not a little bit fun to drive. [00:01:30] We've come so far in terms of overall ride quality, noise vibration and harshness and things of that nature in all pickup trucks that it's frankly surprising to see something at the very bottom end in terms of price of the market be as good as this is. I think that you're going to get a lot of people who are into the truck lifestyle who like the look. You're going to get a lot of people who are moving down from bigger trucks that still want to have a little bit of capability. Then with things with a truck of this nature where you're talking about a [00:02:00] sub-$25,000 price point, you're just going to get a lot of people who want a vehicle of any kind, kind of a budget vehicle.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.