Gmc Sierra 1500 4wd Crew Cab 143.5 Sle Low Miles Truck Automatic Gasoline Vortec on 2040-cars

Auto blog

2021 GMC Yukon will pull a 180 thanks to a Hurricane Turn feature

GMC isn't a hip, young startup, but its engineers are out to prove it's possible to teach an old dog new tricks. The next-generation Yukon will offer adventurers seeking a quick turn-around a "Hurricane Turn" feature that functions a lot like Rivian's Tank Turn technology. The two systems use different hardware to perform a similar action. We didn't hear anything about the Hurricane Turn feature during the Yukon's unveiling because GMC planned to keep it under wraps until later, but an eagle-eyed report at Motor Trend uncovered it and quizzed the firm. It's real, and it's engaged when the driver switches the stability control system off, energetically turns the steering wheel in either direction, and mashes the accelerator pedal to the floor. The Yukon needs to be on a loose surface, too. If you're turning right, the on-board computer applies braking power to the passenger-side wheels to prevent them from spinning, while the engine continues to turn the driver-side wheels to rotate the Yukon on its own axis. The exact opposite happens if you're turning left. It's clever and relatively simple; there's no extra hardware required to enable the feature, though it shows the next Yukon is far more advanced than its predecessor. It goes without saying that only four-wheel drive models will receive the Hurricane Turn feature. There's no word yet on whether it will be compatible with all three engine options, or if it will be limited to a certain trim level. GMC will publish additional details about the system, and hopefully a video of it in action, in the coming months. Rivian, on the other hand, leveraged its four-motor electric powertrain to teach the R1T (and presumably the R1S) how to pull a 180. The right wheels turn in the opposite directions as the left wheels – hence the name Tank Turn – to spin the truck around like a CD in a Walkman. Its system doesn't use the brakes. The 2021 Yukon is due in showrooms in the summer of 2020, and Amazon-funded Rivian won't start making the R1S until the end of 2020 at the earliest, so GMC will beat its younger rival to the punch. What remains to be seen is how often motorists use either function. We're betting not very once the initial novelty wears off. Related Video:    

GM considering new powertrain options for large SUVs

Aside from the new General Motors offerings, there's not a whole lot of action going on in the fullsize SUV segment. That doesn't seem to be stopping GM from pushing the envelope in the market as Automotive News is reporting that the automaker is looking to introduce some new powertrain options into the Chevy Tahoe (and Suburban), GMC Yukon (and Yukon XL) and the Cadillac Escalade - all have been redesigned for the 2015 model year.
Now, we already know that GM and Ford are collaborating on nine- and ten-speed transmissions for a broad range of applications (including the big SUVs), but this new report says that GM is also considering other options as a way to one-up the competition and, of course, to optimize fuel economy. AN quotes Jeff Luke, executive chief engineer for GM trucks, as saying that "interesting powertrain technologies" are coming including a return of a hybrid SUV and possibly even a diesel engine. Although it sounds like the latter could come down to how customers respond to the 2014 Jeep Grand Cherokee EcoDiesel.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.