Awd Extended Cab Quadrasteer 6.0 Vortec 1 Owner New Tires Leather Trailer Towing on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

2020 GMC Sierra Heavy Duty First Drive Review | King of the haul

JACKSON HOLE, Wyo. — The 2020 GMC Sierra Heavy Duty is a bit of a mixed bag. It excels at the tasks an owner is likely to require from a massive pickup truck, but the interior is a definite letdown. Taken as a whole the truck boasts several class-leading specifications and features that make up for the lackluster look and feel of the cabin. And it's much more successful than the mechanically similar Chevy Silverado HD, which shares the Sierra's weaknesses but few of its subjective strengths. GMCÂ’s Sierra HD may share most of its major bits and pieces with the Silverado, but the strongest reason to pick the GMC over the Chevy is that the SLE and SLT trims of the Sierra HD are legitimately handsome. And the rugged, off-road-themed AT4 package is new for 2020 with a blacked-out look that we think a lot of buyers are going to love. Even the ostentatious, chrome-dipped Denali trim looks classy compared to the in-your-face look of FordÂ’s Super Duty line. The same canÂ’t be said for the Silverado HD, which, depending on trim level, varies from garish to just plain ugly. The six-function MultiPro tailgate is the next major differentiator. ItÂ’s not perfect — and mounting a hitch ball in the receiver renders some of its functionality unusable — but itÂ’s unique and potentially very useful to a subset of truck customers. WeÂ’ve covered MultiPro several times already, but if youÂ’re still not clear on its advantages, watch the video below for a demonstration (that's a light-duty Sierra in the video, but the tailgate works the same). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Another unique selling proposition is the AT4 trim, since Chevrolet doesnÂ’t (yet) offer its Trail Boss package on the Silverado HD. The most obvious competitor to the Heavy Duty AT4 is the Ram Power Wagon, and the GMCÂ’s 3,615 pounds of payload and 18,500 pounds of towing capability handily outdo the RamÂ’s ratings of 1,660 and 10,620. Granted, the trucks arenÂ’t aimed at quite the same buyer — the Power Wagon has legit off-road credibility thanks to upgrades like its electronically disconnected sway bars, 12,000-pound Warn winch, and a forward-facing trail camera. But unlike the GMC Sierra AT4, it isnÂ’t available with a diesel. No matter; those aiming for a rough-and-tumble appearance in a heavy duty now have a couple options.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.