2015 Gmc Sierra 1500 on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GMC teases Hummer EV's removable roof panels

Today was supposed to be the day that GM took the wraps off its GMC Hummer EV. We were told as much during the Super Bowl commercial, but GM revised it to an undecided future date, citing the coronavirus as the reason. Instead of the big reveal, we have a teaser.  The Hummer EV is going to feature removable roof panels, and now we get a better look at them. There are four roof panels and a front T-bar that come out of the truck. You can see what that looks like in the video at the top of this post. Comparisons to Jeep are obvious as the open-air experience is likely similar to the Gladiator and Wrangler with their hardtop roof panels removed. That zero-limits slogan makes a bit of sense from this respect. With the sheer number of roof panels, we suspect a single person will be able to remove them alone. In addition to the video of the roof, we get a small peek at the massive digital screens the Hummer will be sporting. Check them out at the bottom of the photo below. They appear to be two large slabs, separate from each other. Other details are scarce on the ground. We’re not sure when the Hummer will make its grand entrance at this point, but are still excited to see the 1,000-horsepower truck hit the road. GMC is still advertising the 0-60 mph time of just 3 seconds, too. The latest tidbit of news suggests that further teasers might be coming, so we could be in for a rather drawn out reveal process. Our senior green editor John Snyder got to see the GMC Hummer in person earlier this year at GMÂ’s EV Day and described it like this: “ItÂ’s a big, off-road-ready pickup complete with giant all-terrain rubber and tow hooks. It features removable roof panels for access to the open sky, which appears to be depicted in the teaser above. It features sail panels behind the C-pillars, similar to those on the Chevy Avalanche and Honda Ridgeline. Its bed was concealed with a tonneau cover, but it sported GMCÂ’s MultiPro tailgate that we first saw on the Sierra Denali. Interior photos showed a spacious interior with blocky shapes, squared hourglass vents that mirror the look of the taillights and a lunar theme that incorporates the topography of the Sea of Tranquility into things like the floor mats and speaker covers. It also has a large infotainment screen as well as a digital instrument panel.” Related video:

GMC Envoy could be returning as GM files for 'Envoy' trademark

The GMC Envoy could be on its way back, if a recent GM trademark filing is any indication of the future. To be exact, GM's trademark filing is for the name "Envoy," and is applicable to "motor vehicles, namely, sport utility vehicles, engines therefor and structural parts thereof." A victim of the recession and high gas prices, the original Envoy – related to the Blazer, and more recently the TrailBlazer and similar GM SUVs – was discontinued after the 2009 model year. In today's SUV-happy market of low gas prices, unearthing the somewhat familiar Envoy name makes a certain amount of sense. As soon as gas prices start trending in the other direction, we'll all be saying the opposite, though. What this SUV will take shape as is the big question now. With the Chevrolet Blazer well and truly on its way, there's every reason for a GMC version of Chevy's stylish new crossover sporting the Envoy name. Another, less likely, possibility is a Traverse-sized vehicle to slot between the shorter Acadia (10 inches shorter than the Chevy Traverse) and the body-on-frame Yukon. GM could come out of left field and make the Envoy a Buick too. It fits the bill with the "En" beginning, and Buick undoubtedly has crossovers in the works. We think that's even more unlikely, but it's important to remember that we're still in the speculation phase. Soon we'll drive Chevy's new Blazer, and perhaps have more news then. Check in next week for that. Related video: