2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

Torque time | 2017 GMC Sierra HD First Drive

It's not the truck that counts, it's how you use it. It's the heavy stuff you fit in its bed or the extremely heavy stuff that gets hooked up to the tow hitch. The ATV, the Jet Skis, the trailer with more square footage than a Greenwich Village apartment. Perhaps you need to get Seabiscuit or, uh, Mr. Ed to wherever they need to gallop next. In our case, there's a pair of very serious-looking snowmobiles perched atop the bed of a GMC Sierra. They spread out as wide as the extended tow mirrors, and their back halves are dangling precariously beyond the truck. Sterling Archer would be giddy; I'm a little nervous. But only because canyon roads and wide vehicles with a high center of gravity go together like peas and custard. The added weight is no sweat at all. That's because this is the 2017 GMC Sierra HD Denali, a truck with the sort of enhanced power, torque, suspension, and stopping capability expected of a heavy-duty pickup. And for this year, the power and torque get a serious bump courtesy of a new 6.6-liter Duramax turbodiesel engine reengineered from almost the ground up with 90 percent new parts. It's quieter and more efficient and it emits less, while most importantly producing 445 horsepower and 910 pound-feet of torque. That's up from 397 and 765, respectively. Chevy fans will note that the same engine is also available in the updated 2017 Silverado HD. Now, for those keeping score at home, that horsepower is best-in-class but the torque number still falls short of the new Ford Super Duty and its Power Stroke diesel V8's 925 lb-ft. Aw shucks. For the record, GM's engineers didn't seem too concerned that they weren't able to eke out an extra 16 torques just to say they're No. 1. "We wanted to first meet emissions and then deliver the maximum horsepower and torque we could, and deliver it over the widest usability range possible," said chief engineer Eric Stanczak. And let's be honest here, 910 pound-feet is herculean, and once again, a jump of 145 lb-ft. Or one Subaru Impreza's worth. Or 110 more than the best Ram can do on a 2500, and its Cummins turbodiesel's 800 pound-feet was eye-popping not too long ago. (The Ram 3500 maxes out at 900 lb-ft with the right transmission.) Ah, but here's the rub. That Cummins-equipped Ram 2500 can still tow more weight according to SAE-compliant measurements – 17,510 pounds for a Ram crew cab with a short bed versus 13,000 in the similar Sierra 2500. The Ford F-250 can manage 15,000.

GMC Canyon will debut in Detroit

With the debut of the Chevrolet Colorado at November's Los Angeles Auto Show, perhaps it was only a matter of time before we saw the small truck's GMC counterpart. That time will be January, as we've received official confirmation that the GMC Canyon will be revived at next month's North American International Auto Show in Detroit.
The news came in the latest issue of the Detroit Auto Show's newsletter, NAIAS Connect. The article hasn't been posted online quite yet, but it details the Canyon as one of the world production debuts slated for the show.
While we've heard rumors that the Canyon would arrive in Detroit, this is our first concrete bit of evidence. As we've detailed before, we expect the Canyon to be stylistically quite different than the Colorado, though the underpinnings will be shared. The teaser image we have above is currently our only look at the new truck. We'll hopefully have more details in the next few weeks as the GMC Canyon draws closer to its official debut.