2013 Gmc Sierra 1500 4x4 on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

2017 GMC Canyon steals Cadillac's V6 for a little more power

GMC is fortifying the Canyon with a new powertrain and two new trim levels for 2017. GMC will give the Canyon the 3.6-liter V6 found in the Cadillac ATS, CTS, CT6, and XT5 crossover. The engine will be matched to an eight-speed automatic transmission, which also can be found on Cadillacs, the new 2017 Colorado, and other General Motors vehicles. The new engine comes with variable valve timing, improved direct injection, and Active Fuel Management, which is a form of cylinder deactivation that shuts off two cylinders to increase fuel efficiency and performance. Power is up from 305 to 308 horsepower, while torque increases from 269 to 275 pound-feet of torque compared to the old 3.6-liter V6. With the new transmission, the Canyon benefits from a higher first gear ratio, which should help drivers get off the line more easily when towing large cargo, and lower overdrive ratios for improved fuel efficiency. The 2016 model had a six-speed automatic. The Colorado also gets the eight-speed transmission for '17. GMC previously announced the All Terrain X and Denali models. The All Terrain X trim is offered on the SLE model and comes with the new 3.6-liter V6 engine or the 2.8-liter Duramax turbo-diesel. The All Terrain X gets Goodyear Wrangler DuraTrac P225/65R17 all-terrain tires, a body-color grille surround and matching rear step bumper, bespoke 17-inch aluminum wheels, and a spray-on bedliner. The truck also is fortified with Hill Descent Control and an off-road suspension. The Denali carries the flag as the most luxurious Canyon model and gets a Bose seven-speaker audio system, more chrome, and interior upgrades. In addition to the new models and the powertrain, the 2017 Canyon will be offered with new colors – Dark Slate Metallic, Mineral Metallic, and Red Quartz Metallic – a new IntelliLink radio with a seven-inch touchscreen, a heated steering wheel as an optional extra, and Standard Teen Driver Mode. The 2017 Canyon, with all of its changes, will be available in the fourth quarter of the year. Related Video: Featured Gallery 2017 GMC Canyon Denali: LA 2015 View 14 Photos News Source: GMC Cadillac GMC Truck Luxury Off-Road Vehicles engine gmc canyon chevrolet colorado

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.