2011 Gmc Sierra 1500 Wt Standard Cab Pickup 2-door 4.3l on 2040-cars

Auto blog

2022 GMC Hummer EV dimensions, clearances and off-road features explained

There are two things that almost everyone immediately thinks of when they hear the word "Hummer." And they are size and off-road capability. Looking at the numbers on the 2022 GMC Hummer EV, it seems the electric pickup has literal truck loads of each. One of the most prodigious numbers is the truck's width. See those clearance marker lights on the roof? They aren't just there for style, they're required by law due its width. At 86.7 inches, it's just a bit wider than a Ford F-150 Raptor, which is itself 6.4 inches wider than a comparable F-150. The Hummer is also 5.5 inches wider than a GMC Sierra. Length is more reasonable at 216.8 inches, which is much less than a full-size crew cab pickup (a Sierra 1500 is 231.7 inches with its 5-foot-8-inch box or 241.2 with the 6-foot-6 one). It's even 3 inches less than the Raptor SuperCab and only 4.4 inches longer than a GMC Canyon with the standard 5-foot-2-inch box. In other words, the Hummer EV is roughly as long as a midsize pickup but is wider than a heavy-duty one.  What does that mean for the cabin? With 38.9 inches of rear legroom, it falls well short of a Sierra Crew Cab's 43.4, but it's important to remember that crew cab pickups have an overkill amount of limo-like legroom. The Hummer's amount is still 3.7 inches longer than a Sierra Double Cab and 3.1 inches longer than a Canyon Crew Cab. Headroom, which was rather pathetic in the old Hummer H2, is 38.6 inches in the back seat – less than both its GMC truck siblings, but not by much. In other words, there should be plenty of space back there. Note that GMC didn't indicate bed length, frunk volume, or importantly, curb weight. We will update this should we find out answers to any of those.  Although it's big, the Hummer has plenty of features to make it nimble off road, both traditional and high-tech. One of the primary features is the height-adjustable air suspension, which offers 13 inches of travel and automatically adjusts damping for driving conditions. It has three main levels, a lowered setting for Aero Mode that helps with improving highway energy use, a default height for the normal driving modes, and a higher setting for the off-road Terrain Mode.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GM invests $24 million to build more crew cab trucks in Fort Wayne

The full-size pickup truck arms race continues unabated here in the United States as Ford, General Motors and Fiat Chrysler battle back and forth for sales supremacy. The Ford F-Series of trucks continues to lead the field in sales (214,611 units sold through the first quarter of 2019), but the race for second place has been a lot more interesting to watch. That's because Ram, long a distant third in truck sales, eked its way past Chevrolet late in 2018 and has managed to hold the position so far in 2019. Don't take this to mean that sales of GM's trucks have been poor across the board. In fact, the automaker reports that sales of its four-door crew cab pickups are up 20 percent in 2019 over the same period a year ago. And that's what makes GM's announcement today so interesting. The automaker is investing $24 million into its assembly plant in Fort Wayne, Indiana to build more Chevy Silverado and GMC Sierra pickup trucks, and the focus will continue to be on crew cab models. "We are building Chevrolet and GMC crew cab pickups at record volume and mix levels to meet customer demand and the $24 million investment will allow us to build even more," said GM chief Mary Barra in a statement. "Crew cab sales have been very strong, and we are expanding customer choice with new models, more cab choices and innovative new powertrains." It's worth noting that, if crew cab sales are up 20% this year, but overall sales are down (over 15% for Silverado and around 2% for GMC), that means it's the cheaper regular cab and double cab models that are lagging. At the same time, sales of the midsize Chevy Colorado have surged 16%. And finally, if you combine sales of the Silverado and Sierra into one bucket, GM still has a comfortable lead over Ram overall. If there's a takeaway here, it's that trucks of all shapes and sizes have been, currently are and will surely remain hot in America, and automakers will continue to invest money into making sure they are able to satiate consumer demand.