1 Owner Duramax Diesel Extended Cargo Van Rear A/c & Heat Lqqk Clean on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

2016 GMC Sierra Denali Ultimate wants to take even more off the top

What do you do when getting to the top of Denali isn't enough? You create a higher peak called Denali Ultimate. That's what GMC has done with the 2016 Sierra, the new Sierra Denali Ultimate adding even more content and showing off the truck's refreshed face and new Denali grille. The reasoning behind this truck is perfectly sane. GMC says that in 2013 it had zero percent of the premium light-duty truck market; since that time, the brand says the segment (with an average transaction price beyond $55,000) has grown by a factor of ten, and the Sierra Denali has given GMC a 15.5-percent share. When it goes on sale in in the first quarter of next year, it can be optioned on the four-wheel drive 1500 Crew Cab with either the five-foot-eight or six-foot-six-inch bed. Standard equipment includes a sunroof, Lane Keep Assist, automatic headlights, Tri-Mode Power Steps, chrome tow hooks, and 22-inch wheels. The press release below has more. GMC Sierra Denali Ultimate: The Pinnacle of Premium Unique 22-inch wheels, expanded package of standard content drives exclusivity DETROIT, Tuesday, Nov. 17, 2015 – GMC is taking the range-topping style, craftsmanship and capability of the Sierra Denali even higher with the 2016 Sierra Denali Ultimate. It builds on the Sierra Denali's already class-leading attributes with a package of precision-crafted features designed to elevate its comfort, design and capability in the growing premium niche of the full-size truck market. GMC introduces the Sierra Denali Ultimate today, ahead of its public debut at the Los Angeles Auto Show. It goes on sale late in the first quarter of 2016. "The Sierra Denali has helped drive the growth of premium portion of the light-duty crew cab segment," said Duncan Aldred, vice president of GMC Sales and Marketing. "This truck is the ultimate expression of the Sierra Denali with greater emphasis on the bold and refined presence and advanced features that make Denali models synonymous with precision and exclusivity." Thanks in large part to Sierra Denali, which was redesigned in 2014, GMC commands 15.5 percent of the premium full-size truck segment, where average transaction prices exceed $55,000. The segment has nearly doubled in 2015 and grown tenfold since 2013, when GMC had zero percent of the market. In fact, Sierra Denali has helped GMC earn a higher share of the premium portion of the light-duty crew cab segment than of the overall full-size pickup segment.