Van Wheelchair Handicap Chevrolet Astro Awd 1992 Sofa Braun Lift High Top on 2040-cars

Auto blog

GM recalling another 2.7 million vehicles in five separate campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles.
The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles - some of them the same models - but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago.
The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents.

GMC Syclone pickup returns via Special Vehicle Engineering

The original GMC Syclone was a 1991 mid-size Sonoma pickup turned muscle truck. Its heavily modified 4.3-liter V6 sported a turbocharger, intercooler, and modified internals, raising output to a Corvette-baiting 280 horsepower and 350 pound-feet of torque. The engine was paired with a four-speed automatic, rear-biased all-wheel drive, and four-wheel antilock brakes (the coming thing). With an all-black livery and a lowered ride height, the Syclone looked the business, and backed up those looks with a 0-to-60 time of 4.3 seconds and a 13.4-second quarter-mile, according to contemporary magazine testing. Given all the recent interest in high-performance pickups, it's amazing that GMC hasn't revived the Syclone. But where manufacturers leave an opening, the aftermarket steps in — in this case that's Specialty Vehicle Engineering, which as CNET reports is resurrecting the nameplate for a build of 100 new Syclones, based on the GMC Canyon, which will update the idea a lot more horsepower. The 2019 Syclone takes as its starting point the extended-cab version of the Canyon. The engine is again a V6, this time a 3.6-liter fitted with a supercharger and a custom cat-back exhaust system, upping output to 455 ponies from the stock 306. SVE's Syclone can be had with rear- or all-wheel drive, and it, too, features upgrades to the brakes and chassis. Six-piston front calipers are fitted in place of the standard four-piston units, and the slotted front rotors are upsized from 12.2 inches to 13.6. The suspension is lowered by two inches up front and five inches at the rear, with stiffer traction bars, bushings, dampers, and a heftier rear anti-roll bar. Unlike the original, the modern Syclone can be had in colors other than black — any of the standard Canyon hues are available — but the appearance is customized with rocker-panel extensions, body-color grille and rear bumper, and a composite hood insert. The interior gets embroidered logos and badges, including a numbered plaque on the dash. The price for the Syclone is $39,995 — that's for the package, on top of the cost of the truck. But at least ordering is easy: The Syclone package can be ordered through select GMC dealers.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.