2009 Gmc Yukon Denali on 2040-cars

Auto blog

2019 GMC Sierra 1500 spied in base trim level

When the 2019 GMC Sierra 1500 half-ton pickup was revealed, it was shown in the ultra-deluxe Denali trim with its carbon fiber bed and trick tailgate. And thanks to spy shots, we've been able to see the more modest SLE a few months ago. Now we get to see it in the most plain work truck iteration thanks to the above photos. This Sierra doesn't appear to have any trim designation. The SLE we saw had a badge in the lower left of the tailgate, but none appear on this except "Sierra." This fits with the current trim scheme for the Sierra, which calls the basic one simply by its model name. In addition to less badging, this Sierra ditches most of the chrome found on other trim levels. The grille insert is plain black plastic, as are the fender vents, door handles and window trim. There aren't engine badges, either. Currently the only engines announced for the Sierra are the gasoline 5.3-liter and 6.2-liter V8s and the diesel 3.0-liter six-cylinder. We would assume from the basic nature of this truck that it has the 5.3-liter V8. Nothing has been announced about a gasoline V6 for the new generation of Sierra and Silverado pickup trucks, despite a 4.3-liter V6 still being available on the 2018 model. Also, since this is a base Sierra, the bed is all steel and the tailgate is one big panel. Pricing still hasn't been revealed for the Sierra. But this and the other Sierra trims will go on sale in the fall, with pricing likely announced sometime in-between. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

GM shows off 'digital vehicle platform' enabling more in-car tech and OTA updates

It appears to have dropped the sobriquet "Global B," but General Motors' new electrical architecture has bowed in drawings and video. This is the "digital vehicle platform" GM president Mark Reuss spoke to Reuters about in 2015, saying it would move a great deal of a vehicle's computer work to the cloud and enable over-the-air updates. Reuss took the microphone for the debut, too, saying, "Our new digital vehicle platform and its eventual successors will underpin all our future innovations across a wide range of technological advancements, including EVs and expanded automated driving." The system will go into production later this year, appearing in dealerships first either on the 2020 Cadillac CT5 or the mid-engined 2020 Chevrolet Corvette. Yes, these are the same electronics cited for delaying the launch of the C8 Corvette over excessive draw, security and getting the more-than-100 computer modules to communicate seamlessly. When Car and Driver asked about that, GM replied with "No comment." Volkswagen's having the same issues with the Mk8 Golf right now, though, so GM isn't alone, and this will be the new normal among OEMs for a while. What's certifiable is that the new architecture is robust enough to handle 4.5 terabytes of data per hour, which is five times what GM's current wiring can handle. And thanks to Ethernet connections of 100 Mbps, 1 Gbs and 10 Gbs, communication within and without the vehicle happens much faster. The advances mean better screen resolutions, better battery management for hybrids and electric vehicles, the capability for over-the-air updates and "functionality upgrades throughout the lifespan of the vehicle." Cadillac's Super Cruise has already been lined up as a leading candidate for constant improvements in the driving assistance suite, a key part of GM's "vision for a world with zero crashes, zero emissions and zero congestion." And whenever GM decides to take the plunge, it will mean a 48-volt electrical system. More than 300 specialists worked on the digital platform, and security was a huge part of the task. We've already heard that GM consulted with Boeing and military contractors on how to prevent hacking. The carmaker has an internal Product Cybersecurity group that reached out to the research community, and created a "bug bounty" program to crowdsource uncovering any flaws.