1998 Gmc Yukon Sle Sport Utility 4-door 5.7l on 2040-cars

Auto blog

Chevy and GMC trucks get CNG option pricing

Chevrolet and GMC have clued us in to pricing of the bi-fuel option for the 2015 Silverado and Sierra 2500HD CNG and 3500HD CNG pickups: it starts at $9,500; we're still missing the rest of the pricing inferred by the word "starts," however. If you remember from the Chicago Auto Show introduction, the 6.0-liter V8 puts out 360 horsepower and 380 pound-feet of torque when drinking gas, 301 hp and 333 lb-ft when inhaling CNG.
Chevrolet figures that a bi-fuel Silverado HD is worth $2,000 in savings if driven 19,500 miles on CNG and 7,500 miles on gasoline in the span of a year, a recoup rate easily attainable to high-mileage fleet owners. It can be specced on double- and crew-cab pickups with single rear wheels, not on dualies.
The 2015 Chevrolet Express and GMC Savana short-wheelbase passenger and cargo vans also get CNG options, starting at $10,825 for the three-tank system, and $12,090 for the four-tank system that can only be had on the cargo hauler. You'll find a bit more info on all of the permutations in the press release below.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

2018 GMC Canyon Denali isn't worth the money

In the GMC lineup, Denali is the top dog. It's the trim with all the bells and whistles, and often provides an experience comparable to Cadillac. Unfortunately that's not the case in the GMC Canyon Denali we drove recently. In the Canyon's case, the Denali trim isn't worth the price premium because it isn't luxurious enough and doesn't distinguish itself from the midlevel SLT trim. While the outside maintains the Denali look with a unique chrome grille, chrome door handles, 20-inch wheels, and big Denali badges (which a guy at a car wash immediately noticed when this editor drove past), the interior and feature set don't rise to meet the borderline Cadillac image of Denali. All GMC did to spruce up the already drab, gray, plasticky interior of the Canyon was give it black leather, some real aluminum trim, some fake wood trim, and stitched soft-touch surfaces. The aluminum and leather are nice touches, but they don't look much different from the black and aluminum-look plastic in lower trim models. The fake wood also looks really fake. They're also exactly the same upgrades as what you'll find in an SLT. But the SLT offers a dark brown color scheme as an option, which would help alleviate the dinginess, and the SLT, equipped exactly like a base Denali, costs $2,690 less at $41,575. The same issue comes up with equipment. The Denali has heated seats and steering wheel, navigation, automatic climate and navigation, but so does the SLT. The big problem here is that Denali is supposed to indicate the best, most luxurious vehicle GMC has to offer, but there's not enough differentiation — or specialness, even — to separate it from a well-optioned SLT. GMC needs to give the Denali something more. It needs some real wood trim, or perhaps some interior schemes with contrasting materials you can't find in other Canyons. It should have some other special luxury features included that can't be added to lower trim GMCs such as a heads-up display, automatic windshield wipers, push-button keyless entry and starting, things like that. The real reason to buy the Canyon Denali is really to get the prestige that the Denali badge brings, rather than the specific equipment it has — the Denali name has some value, after all. But if you can look past the badge and focus on practicality, the SLT is the runaway winner, offering the exact same experience for a notably lower price.