Fwd Sle-1 Certified Suv 2.4l Air Conditioning, Single-zone Manual Front Climate on 2040-cars

Auto blog

GM to offer 2 years free maintance on most 2014 models

A day after Ford announced it was scaling back the complimentary maintenance program for its Lincoln brand, General Motors has gone in the completely opposite direction, offering most of its 2014 lineup with free maintenance. Since 2011, Cadillac models have all come with a four-year/50,000-mile complimentary maintenance program, but Chevrolet, Buick and GMC vehicles will now come standard with free maintenance for two years or 24,000 miles for the 2014 model year.
The program will give vehicle owners and lessees free oil changes, tire rotations and 27-point inspections following the recommended maintenance schedule laid out in each vehicle's owner's manual. We contacted GM to see which vehicles were eligible for the program, and a spokesperson got back to us with the following comment:
"All 2014 models are eligible, it's just that the included services vary by model, e.g., Spark EV would not need oil changes, Corvettes don't recommend tire rotations."

2019 GMC Sierra interior looks just like the Silverado's

The GMC Sierra has pretty much always been a Chevy Silverado in disguise. There was maybe some fancier trim plus the availability of the ritzier Denali trim, but the differences mostly amounted to different makeup on identical twins. As we can see from the spy photos above, the yet-to-be-shown 2019 GMC Sierra will actually have a more distinctive exterior, but the interior will continue the me-too tradition. Immediately apparent is the fact that the whole dashboard is carryover. It's the same chunky, plasticky place to be that, while likely highly functional, did little to impress when unveiled at the Detroit Auto Show. Really, only the volume, tuning and climate control knobs look different from those in the Silverado. They appear to have a different ridged pattern on the edges, and are possibly a shinier, glossier finish. The steering wheel also looks different, with a chunkier center and more svelte spokes. The Sierra exterior would seem to be better differentiated. The headlights are very different in that they wrap around the fenders more so than on the Chevy. The grille looks more vertical and aggressive than the Silverado's. The wheel arches also differ in that the forward corners are rounded and the rears are more squared off. The GMC Sierra will be revealed March 1 in Detroit. As per usual, it will probably share all of its powertrain bits with the Silverado. That means at least 5.3- and 6.2-liter gasoline V8s and the new turbocharged 3.0-liter inline-six diesel engine. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.