2016 Gmc Sierra 3500 on 2040-cars

Auto blog

GMC and EarthCruiser to collaborate on Hummer EV Pickup overlander project

GMC just announced a collaboration with overlanding vehicle builder EarthCruiser, and the end result is going to provide us with a co-developed Hummer EV Pickup. The photo you’re looking at above is the first teaser for whatÂ’s to come of the partnership. The Hummer team will be working with EarthCruiserÂ’s research and design division to develop an overland upfit solution for EVs that it says will initially be integrated into the Hummer EV Pickup. In case you werenÂ’t familiar with EarthCruiser, theyÂ’re the people that have made utterly wild overlanding vehicles like the Terranova, FX and EXP. Needless to say, EarthCruiser makes some pretty rad stuff, and none of it is cheap. GMC says this collaboration will look to use EarthCruiserÂ’s expertise gained from developing its vehicles to create an overlanding solution for the Hummer. We should expect to see EarthCruiserÂ’s engineering technologies integrated into the vehicle, which will allow the Hummer to go even further off-road and provide the ability for owners to live with their trucks in the wilderness.  The one snag with overlanding in EVs is the typically long journeys away from civilization. As an example, the EarthCruiser XP and EXP feature 60-gallon fuel tanks to ensure you can get to where you need to go and power the living situation for a long time once youÂ’re there. WeÂ’ll be interested to hear what GMC and EarthCruiser have to say about the challenges presented by overlanding in an EV. Already visible in the teaser image is what looks like a solar panel-filled roof and rear side pods for supplies. The concept truck will be presented in late summer 2023, and while no date for a production vehicle was provided, itÂ’s likely that the final truck will come soon after. Related video:

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GM shows off 'digital vehicle platform' enabling more in-car tech and OTA updates

It appears to have dropped the sobriquet "Global B," but General Motors' new electrical architecture has bowed in drawings and video. This is the "digital vehicle platform" GM president Mark Reuss spoke to Reuters about in 2015, saying it would move a great deal of a vehicle's computer work to the cloud and enable over-the-air updates. Reuss took the microphone for the debut, too, saying, "Our new digital vehicle platform and its eventual successors will underpin all our future innovations across a wide range of technological advancements, including EVs and expanded automated driving." The system will go into production later this year, appearing in dealerships first either on the 2020 Cadillac CT5 or the mid-engined 2020 Chevrolet Corvette. Yes, these are the same electronics cited for delaying the launch of the C8 Corvette over excessive draw, security and getting the more-than-100 computer modules to communicate seamlessly. When Car and Driver asked about that, GM replied with "No comment." Volkswagen's having the same issues with the Mk8 Golf right now, though, so GM isn't alone, and this will be the new normal among OEMs for a while. What's certifiable is that the new architecture is robust enough to handle 4.5 terabytes of data per hour, which is five times what GM's current wiring can handle. And thanks to Ethernet connections of 100 Mbps, 1 Gbs and 10 Gbs, communication within and without the vehicle happens much faster. The advances mean better screen resolutions, better battery management for hybrids and electric vehicles, the capability for over-the-air updates and "functionality upgrades throughout the lifespan of the vehicle." Cadillac's Super Cruise has already been lined up as a leading candidate for constant improvements in the driving assistance suite, a key part of GM's "vision for a world with zero crashes, zero emissions and zero congestion." And whenever GM decides to take the plunge, it will mean a 48-volt electrical system. More than 300 specialists worked on the digital platform, and security was a huge part of the task. We've already heard that GM consulted with Boeing and military contractors on how to prevent hacking. The carmaker has an internal Product Cybersecurity group that reached out to the research community, and created a "bug bounty" program to crowdsource uncovering any flaws.