1986gmc One Ton Dually on 2040-cars

Auto blog

GM able to add diesel to half-ton pickups if market demands it

A few years ago, the trend in half-ton pickup trucks was ultra-luxurious trims, often with the words "limited" or "platinum" tacked on after the model name. That was well and good, but we like this latest fad a lot more - diesel engines. First, Ram came to bat with a 3.0-liter, V6 turbodiesel for the 1500, then Nissan announced that the next-generation Titan would be getting an eight-cylinder Cummins diesel.
Now, word is coming in from AutoGuide that General Motors can, if it so chooses, drop a diesel engine into its light-duty trucks. The plot thickens, though, as it turns out that said diesel would be the same one Ram is using for its truck. According to AG, that engine comes from VM Motori, which GM owns a sizable chunk of. Therefore, GM can snag the 3.0-liter, V6 diesel for its trucks just as easily, if not more easily, than Ram.
If it's so easy for the Detroit-based manufacturer to access the engines, why not offer the a diesel-powered Sierra and Silverado from the start, then? According to GM spokesman Tom Wilkinson, The General doesn't seem so confident in a diesel pickup outside of its HD offerings. According to Wilkinson, the cost-benefit ratio doesn't line up for customers, thanks to both the impact on the truck's sticker price and the higher price of diesel, in general (the national average for a gallon of diesel is 43 cents more than a gallon of 87-octane unleaded).

GMC teases rugged 2021 Canyon AT4 pickup

GMC promised every model in its lineup would get the AT4 treatment by 2021. Having introduced AT4 versions of the Sierra, Acadia and Sierra HD already, that leaves the Canyon, Terrain and Yukon waiting their turn for the procedure. During a press even for the Sierra HD in Jackson Hole, Wyoming, GMC teased Canyon AT4 as next in line to receive upgraded off-road chops. The automaker had a camo'ed prototype Canyon AT4 in a trailer hooked up to a Sierra HD. When Sierra occupants pulled up the feed from the trailer-mounted camera on the infotainment screen, said occupants got a view of the masked midsize pickup between two walls reading, "The first ever Canyon AT4" and "Coming early 2020." The main mysteries are how extensive the pickup's AT4 transformation will be, and when it will go on sale. The AT4 kit changes depending on model. The Sierra AT4 upgraded performance and looks, with features like a two-speed transfer case, locking rear differential, a two-inch lift and Rancho monotube shock absorbers, skid plating, black-chrome grille and body-colored grill surround. The 2020 Acadia AT4 is mostly about looks, pairing standard all-wheel drive with black trim and wheels, and all-terrain tires. The Canyon's expected to weigh in on the Sierra end of the overhaul, and slide into the lineup between the SLT and top-tier Denali trims. The mods will put it beyond the current All Terrain trim being phased out across the lineup, but leave space between the Canyon AT4 and its Chevrolet sibling, the Colorado ZR2. GMC VP Duncan Aldred said, "They’re going to have different capability levels. The ZR2 is extreme capability. AT4 isnÂ’t positioned as extremeÂ… not intended to rival the ZR2." And the Colorado gets the even chunkier Bison version on top of that. The Canyon AT4 is predicted to join the lineup for the 2021 model year, so although it's "coming early 2020," it might not go on sale until much later in the year. GM's midsized pickup twins will be endowed with changes so mild that neither brand will classify the work with the term "midcycle enhancement." Figure a refining around the grille and lights and a few minor fillips otherwise. Next-generation models of the Canyon and Colorado aren't due until 2023, and there's apparently debate inside GM about an interior refresh for both trucks before then. The Terrain should mirror changes to the Acadia, and it would be a pleasant surprise to see the all-new Yukon also due in early 2020 get serious off-road teeth.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.