2015 Gmc Sierra 2500 Denali on 2040-cars

Auto blog

GM recalling another 2.7 million vehicles in five separate campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles.
The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles - some of them the same models - but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago.
The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Autoblog Minute: Ford Ranger, UK Mustang, Hyundai Hybrid

Ford may bring the Ranger back to the US, the UK goes nuts over the Mustang, and the battle of hybrids heats up with spy shots of the Toyota Prius and a new Hyundai. Autoblog's senior editor Greg Migliore reports on the weekly recap edition of Autoblog Minute. Show full video transcript text [00:00:00] Ford may bring the Ranger back to the US, the UK goes nuts over Mustang, and the battle of hybrids heats up with spy shots of Prius and a new Hyundai. I'm Autoblog senior editor Greg Migliore and this is your Autoblog Minute weekly recap. 2011 was the last time we saw Ford's midsize pickup in the US but according to a report from the Detroit News we could see production of the Ranger at the [00:00:30] Dearborn automaker's Michigan Assembly Plant as early as 2018. Ranger could compete with the Chevy Colorado and perhaps revive the compact and midsize pickup market for Ford, but the future of Ranger in the US depends a lot on Ford's ongoing negotiations with the UAW. About 2,000 orders for the 2015 Mustang were placed in the UK, tying up production of the pony car until July 2016. According to details in a press release from Ford UK, [00:01:00] it looks like Brits are a lot like their American cousins, opting for the 5.0 liter V8, with Race Red as the popular color of choice. Photos of the 2016 Toyota Prius leaked generating a lot of buzz over the styling. This fourth generation Prius will have some new competition as spy shots of a new Hyundai also surfaced this week. The car is said to be a hybrid and a bonafide "Prius fighter." Those are the highlights from the week that was. Be sure to check out my full recap this Saturday, [00:01:30] including the latest in FCA rumors for 2016. For Autoblog, I'm Greg Migliore. Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals. UAW/Unions Ford GMC Hyundai Toyota Truck Hybrid Autoblog Minute Videos Original Video