2002 Gmc 2500hd Crew Cab Duramax Diesel 4wd on 2040-cars

Auto blog

Hummer EV SUV official range announced: 3X truck tops 350 miles

The first run of GMC Hummer EVs were in one single specification: pickup truck in Edition 1 with all the off-road goodies. The most pertinent of those off-road upgrades to electric range being the 18-inch wheels with mud-terrain tires. And it was rated for 329 miles. But now, there are more Hummer variants. The pickup truck is now available with a 3X trim that comes standard with more efficient all-terrain tires wrapped around 22-inch wheels, and there's the SUV with both trims and both types of tires, not to mention a smaller battery pack. And now we have the official range estimates for them. We'll start with the Hummer EV SUV, since all of the official range ratings are new to us. The tires are the key factor, with the all-terrain equipped Edition 1 and 3X both managing 314 miles of range. Yes, this is less than even the mud-terrain-equipped truck, but that's mainly because the shorter length of the SUV means it has fewer battery cells and capacity. It has about 170 kWh of capacity versus the truck's 200+. Adding the Extreme Off-Road Package and its more aggressive tires drops range to 298 miles. The Four-Wheel-Steer system lets the 2022 GMC HUMMER EV Pickup m View 17 Photos As with the SUVs, the Hummer EV truck gets a solid range boost to 355 miles when it's not equipped with the off-road package. There's another benefit to the regular all-terrains on the Hummer EV truck: towing capacity. At 8,500 pounds, it can tow an extra 1,000 pounds over the models with the off-road package. GMC also notes that another potential benefit to the all-terrain-equipped trucks is a suspension tuned for better on-road handling. And our experience has shown that even Hummer with the off-road package isn't too shabby on pavement. Of course, skipping the off-road package will also save you some money, as will opting for the 3X trims. So unless you're really going off-road seriously, and would make regular use of the extra skid plates, under-truck camera and chunky tires, the standard suspension and tire setup really is the way to go. Related video:

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.