2024 Gmc Sierra 1500 Pro on 2040-cars

Auto blog

2020 GMC Sierra 2500 HD and 3500 HD spied on public roads

We saw spy shots of the Chevrolet Silverado HD a short time ago, and now it looks like GM has got the 2020 GMC Sierra Heavy Duty trucks running around in public too. The one we're looking at here appears to be a 2500 Denali Crew Cab, distinguished easily by the same Denali grille on the 2019 Sierra 1500. Aesthetic differences between the front fascias on the 1500 and 2500 HD are small, but the 2500 is a bit more muscular in the hood and lower trim treatment. GMC doesn't look like it's hiding a whole lot with this camouflage, since the sheets over the grille and headlights are mostly transparent. The black tarp over what appears to be a hood scoop leads us to believe it will have the same type of hood design as the 2018 HD. Other interesting bits revealed here are around the rear of the pickup. We can see the same interface for the MultiPro six-way tailgate on this truck as the 1500, so at least the Denalis will have the trick tailgate (we'd expect every trim to have it, though). Just like we saw on the Silverado, the Sierra HD gets the stepside feature just ahead of the rear wheels. LED taillights are clearly visible through the thin veiling, and GM's rear steps remain as well. in addition to this 2500 HD, our spy photographers also caught a 3500 HD model. This one isn't a Denali, as the grille shows its hand again. The grille is different than any of GM's designs on the new trucks we've seen thus far, actually. GMC showed us a teaser of what a new Silverado HD grille would look like months ago, but this differs even further than that. It looks rather minimalistic under the sheet for now, with strong horizontal slats. The actual shape and design of the truck is revealed for the most part, since it's just wearing a thin body wrap. Its mirror design appears to be different from last year's, as the arm is completely solid. A sidestep right in front of the rear wheels carries over from the 2500 HD too. We imagine both this truck and the Silverado HD will debut early next year during auto show season. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Chevrolet Silverado, GMC Sierra could get independent rear suspension

The Chevrolet Silverado and the GMC Sierra could reportedly receive a variant of the four-link independent rear suspension found under the new Tahoe and Suburban. While that's not a surprise, a recent report suggests electrification, not comfort, convinced General Motors to make the change. Replacing the time-tested solid rear axle with an independent suspension will improve comfort, handling and off-road prowess, while adding weight, and likely making the trucks a little bit more expensive. It's a fair trade-off, but GM Authority learned the real reason for the swap is that at least one of the pickups will spawn an electric model, and it's more difficult to package a bulky battery pack around a solid rear axle. The independent rear suspension takes up far less space, even if it has more moving parts. General Motors will build its first regular-production electric pickup on an evolution of the Silverado's T1 platform named BT1, according to the same source. The b stands for -- you guessed it -- batteries. The firm reportedly doesn't want to make two suspensions for cost reasons, so the independent setup will come standard regardless of whether the truck runs on gasoline, diesel, or electricity. As a bonus, Chevrolet and GMC could choose to offer their T1-based trucks with Magnetic Ride Control or an air suspension, options available on the 2021 Suburban and Tahoe. The independent rear suspension will also find its way to the next-generation GMC Yukon due to be revealed January 14, and to the 2021 Cadillac Escalade scheduled to make its debut February 4. The long-rumored, born-again Hummer will get it, too, because it will arrive as an electric model built on the BT1 platform. It's worth noting none of this is official, and General Motors has remained quiet about what's next for its new suspension design, and what will be under its electric truck's sheet metal. If the GM Authority report is accurate, the Silverado (pictured) and the Sierra could ditch their solid rear axle for the 2021 model year. The change will likely be accompanied by other tweaks inside and out. Featured Gallery 2019 Chevrolet Silverado 1500 View 16 Photos Chevrolet GMC Truck