2020 Gmc Sierra 1500 Denali on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

2020 GMC Sierra 2500 HD and 3500 HD spied on public roads

We saw spy shots of the Chevrolet Silverado HD a short time ago, and now it looks like GM has got the 2020 GMC Sierra Heavy Duty trucks running around in public too. The one we're looking at here appears to be a 2500 Denali Crew Cab, distinguished easily by the same Denali grille on the 2019 Sierra 1500. Aesthetic differences between the front fascias on the 1500 and 2500 HD are small, but the 2500 is a bit more muscular in the hood and lower trim treatment. GMC doesn't look like it's hiding a whole lot with this camouflage, since the sheets over the grille and headlights are mostly transparent. The black tarp over what appears to be a hood scoop leads us to believe it will have the same type of hood design as the 2018 HD. Other interesting bits revealed here are around the rear of the pickup. We can see the same interface for the MultiPro six-way tailgate on this truck as the 1500, so at least the Denalis will have the trick tailgate (we'd expect every trim to have it, though). Just like we saw on the Silverado, the Sierra HD gets the stepside feature just ahead of the rear wheels. LED taillights are clearly visible through the thin veiling, and GM's rear steps remain as well. in addition to this 2500 HD, our spy photographers also caught a 3500 HD model. This one isn't a Denali, as the grille shows its hand again. The grille is different than any of GM's designs on the new trucks we've seen thus far, actually. GMC showed us a teaser of what a new Silverado HD grille would look like months ago, but this differs even further than that. It looks rather minimalistic under the sheet for now, with strong horizontal slats. The actual shape and design of the truck is revealed for the most part, since it's just wearing a thin body wrap. Its mirror design appears to be different from last year's, as the arm is completely solid. A sidestep right in front of the rear wheels carries over from the 2500 HD too. We imagine both this truck and the Silverado HD will debut early next year during auto show season. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM recalling 54k Cadillac SRX, HD pickup models

There are more recalls to report General Motors, but these latest actions pertain to newer examples of the Cadillac SRX, Chevrolet Silverado HD and GMC Sierra HD. With so much scrutiny on the company's recall strategy, GM is under increasing pressure to call in defective models more quickly, and it appears to be doing so here.
Here in the US, the automaker is recalling 50,571 Cadillac SRX crossovers from the 2013 model year fitted with the 3.6-liter V6 because the transmission control module programming can cause a three- or four-second lag in acceleration at low speeds. The explanation filed with the National Highway Traffic Safety Administration states, "if the following sequence occurs within two seconds: during an upshift from first to second gear (8-10 mph), the driver then brakes the vehicle to less than 5 mph, and then accelerates again," the delay can occur. According to Automotive News, the recall effects 56,400 vehicles worldwide, and the company is not aware of any crashes caused by the problem. The fix consists of a transmission control module (TCM) reflash.
In a separate recall, GM is repairing 51 Chevrolet Silverado HD and GMC Sierra HD pickups from the 2015 model year in the US. In vehicles with diesel engines and dual fuel tanks, the nuts that connect the fuel pipe to each side of the transfer pump between the tanks may be improperly torqued, which could cause a fuel leak. Obviously, this could be a fire hazard. The remedy is simply tightening the hardware. According to GM spokesperson Alan Adler, there have been no fires actually caused by the potential leak. "Only 21 of the trucks are in customer possession and they can be fixed anytime because there are no parts involved. The others are being fixed at dealerships," Adler said in an email to Autoblog.