2013 Gmc Sierra 1500 Sle on 2040-cars

Auto blog

GM recalling 54k Cadillac SRX, HD pickup models

There are more recalls to report General Motors, but these latest actions pertain to newer examples of the Cadillac SRX, Chevrolet Silverado HD and GMC Sierra HD. With so much scrutiny on the company's recall strategy, GM is under increasing pressure to call in defective models more quickly, and it appears to be doing so here.
Here in the US, the automaker is recalling 50,571 Cadillac SRX crossovers from the 2013 model year fitted with the 3.6-liter V6 because the transmission control module programming can cause a three- or four-second lag in acceleration at low speeds. The explanation filed with the National Highway Traffic Safety Administration states, "if the following sequence occurs within two seconds: during an upshift from first to second gear (8-10 mph), the driver then brakes the vehicle to less than 5 mph, and then accelerates again," the delay can occur. According to Automotive News, the recall effects 56,400 vehicles worldwide, and the company is not aware of any crashes caused by the problem. The fix consists of a transmission control module (TCM) reflash.
In a separate recall, GM is repairing 51 Chevrolet Silverado HD and GMC Sierra HD pickups from the 2015 model year in the US. In vehicles with diesel engines and dual fuel tanks, the nuts that connect the fuel pipe to each side of the transfer pump between the tanks may be improperly torqued, which could cause a fuel leak. Obviously, this could be a fire hazard. The remedy is simply tightening the hardware. According to GM spokesperson Alan Adler, there have been no fires actually caused by the potential leak. "Only 21 of the trucks are in customer possession and they can be fixed anytime because there are no parts involved. The others are being fixed at dealerships," Adler said in an email to Autoblog.

Train derailment leaves Jeep, GMC, Chevy pickups damaged in Nevada

An unfortunate train derailment is causing some inevitable delays for pickup truck customers west of Nevada. Yesterday morning, 33 train cars derailed in Lincoln County, and the cargo that was being transported consisted of new Jeep Gladiators and Wranglers along with Chevrolet Silverados and GMC Sierras, judging from the photos released by the Lincoln County Sheriff’s Office. The train derailment also caused the adjacent road to be closed, and local law enforcement recommends the area is to be avoided as long as it takes to clean it all up. In the photos, damaged Jeeps and other trucks sit either on their wheels or shiny-side-down as the incident is being assessed. Available information says there were thankfully no personal injuries, but itÂ’s not likely any of these trucks will end up in customer hands, even with a significant discount. Pre-registration transport damage, significant or not, has often resulted in scrapping complete vehicles so that manufacturers can steer clear of liability issues. Hooniverse.com, which also reported on the incident, notes a couple of interesting things. Firstly, the upended Gladiator seems to have a pretty sturdy support structure for its glasshouse, thanks to its new rollbars. Another matter is that the GM trucks, also pictured, wear discreet and temporary transport steel wheels instead of fancier items, perhaps to deter thieves eager to grab a shiny set from trucks on their way to the dealer. Still, itÂ’s a shame these vehicles could never fulfill their hauling purposes in the hands of new owners. Perhaps the manufacturers can at least use the damage for data-gathering purposes. Related Video:    

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.