2000 Gmc Sierra 1500 Sl Extended Cab Pickup 3-door 4.8l on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

2014 GMC Sierra 4.3L V6 to offer segment-best 305 LB-FT

General Motors has released more information on the 4.3-liter V6 available in the 2014 GMC Sierra. The engine will serve up 285 horsepower and 305 pound-feet of torque, with a six-speed automatic transmission, and giving the V6 Sierra a maximum tow rating of 7,200 pounds in regular cab, short bed four-wheel drive configuration. GM claims that figure is 500 pounds more than the equivalent Ford F-150 equipped with a 3.7-liter V6, and 700 pounds more than the Ram 1500 with its 3.6-liter V6. Buyers can expect to see the 2014 GMC Sierra with the 4.3-liter engine start at $25,085 including destination.
While the engine does deliver more torque than either of its main competitors, it falls short on the horsepower front. The 3.7-liter V6 in the F-150 develops 302 hp while the 3.6-liter V6 in the Ram 1500 yields 305 hp. GM says fuel economy estimates for its newest entry will land later this year. Check out the full press release below for more information.

GMC's Bronco-slaying SUV will remain a dream, report says

GMC won't help rival Ford in its quest to dethrone the Jeep Wrangler, according to a recent report. The body-on-frame off-roader the firm planned as an alternative to the upcoming Bronco and the fourth-generation Wrangler allegedly fell victim to a top-down restructuring plan implemented recently by parent company General Motors. Citing anonymous inside sources, Muscle Car & Trucks reported the rugged SUV remained part of GMC's long-term product plan until November 2018. It was shaping up to be one of the company's most distinctive models in decades. It should have arrived as a dedicated off-roader developed and sold exclusively by GMC; it wouldn't have had a twin in the Chevrolet portfolio. The problem, according to the report, is that the off-roader (which might have revived the heritage-laced Jimmy nameplate) should have been built on the 32XX platform designed to underpin the next Chevrolet Colorado/GMC Canyon twins. General Motors canceled that project to save money, so the SUV was consigned to the attic before we even spotted prototypes testing on and off the pavement. The updated pickups will instead arrive on an evolution of the frame found under the models currently found in showroom. There's no word on why that architecture can't support a Wrangler-like SUV. GMC never confirmed plans to build an off-roader aimed at the Jeep Wrangler and the upcoming Ford Bronco, so it certainly won't validate reports claiming it has canceled the model. This isn't the first time we've heard about a body-on-frame SUV made by a brand in the General Motors portfolio, though. Hummer was supposed to take the fight directly to Jeep with an off-roader accurately previewed by the 2008 HX concept, but it shut down before it finished developing the model. Rumors of GMC picking up where Hummer left off have come and gone on a shockingly regular basis over the past few years, yet the Wrangler remains in a class of one.