2000 Gmc Sierra 1500 K1500 on 2040-cars

Auto blog

GM seatbelt recall affects over 1m Silverados and Sierras

The Basics: General Motors will recall 895,232 examples of the 2014-2015 Chevrolet Silverado and GMC Sierra 1500 pickups in the US. The campaign will also affect the trucks in markets worldwide, and the total number the company will recall is 1,037,982. The Problem: A steel cable connects the seatbelt to the vehicle, but over time repeated bending can cause the part to fatigue and separate. Injuries/Deaths: None reported. The Fix: Dealers will enlarge the side shield opening and install a pusher bracket on the tensioner. Technicians will also replace the entire tensioner assembly if necessary. If You Own One: GM will contact owners about the recall. The company hasn't said when those notifications would begin. More Information: There are still about 3,000 new examples of these older pickups at dealerships. Until mechanics fix the problem, these vehicles are subject to a stop-sale. Similar problems have affected the General's vehicles in the past. In 2015, the company recalled over 400,000 units of the 2011-2012 Chevrolet Malibu for fatiguing cables. It also hit over a million Lambda platform crossovers in 2014. GM Recalling Certain 2014-15 Pickups to Repair Seat Belts DETROIT – GM is voluntarily recalling 895,232 model year 2014-15 Chevrolet Silverado and GMC Sierra 1500 pickups in the United States because the flexible steel cable that connects the seat belt to the vehicle can fatigue and separate over time as a result of the driver repeatedly bending the cable when entering the seat. This issue was discovered through warranty data, and there have been no reports of crashes, injuries or fatalities related to this issue. For trucks in the field, dealers will enlarge the side shield opening, install a pusher bracket on the tensioner, and if necessary, replace the tensioner assembly. The recall in the United States includes a stop-sale of approximately 3,000 new 2014 and 2015 model year pickups still on dealer lots. Dealers will repair the vehicles prior to delivering them to customers. Customers will be notified by General Motors. They also can look up their vehicle identification number (VIN) at either https://vinrcl.safercar.gov/vin/ website or at https://my.gm.com/web/portal/ownercenter to see if their vehicle is part of the recall. GM also will voluntarily recall and repair these models in other countries where they are sold, including Canada, Mexico, and several countries in Latin America and the Middle East.

2021 GMC Canyon gets AT4 trim and a 'more upmarket' Denali

The AT4 train continues at GMC, with the 2021 Canyon AT4 climbing to altitude in Vail, Colorado, to announce its arrival. The off-road package, teased during the Sierra HD launch last year and already rolled out on the Sierra and Acadia, replaces the Canyon All Terrain trim. The rectangular grille goes away, the new rig picking up a larger, Sierra-like grille with a dark chrome surround and vertically-oriented fog lights. And because nothing says off-road badass like red recovery hooks, of course there's a pair peeking out from under the tweaked lower bumper. Otherwise, all the All Terrain kit carries over, like the tuned suspension with Advanced Hill Descent Control, transfer case skid plate, automatic locking rear differential, and 31-inch Goodyear Wrangler DuraTrac® tires on 17-inch aluminum wheels. Inside, the headrests are embroidered with AT4 logos, and Kalahari stitching is exclusive to this trim. GMC also announced a more polished Denali trim, without providing any photos. The coming pickup adopts a grille with a "more sculpted and layered pattern," plus five-inch chrome assist steps, and 20-inch Diamond Cut aluminum wheels that we'll assume come in a different pattern than the current 20-inch Diamond Cut aluminum wheels. The cabin goes upscale with open-pore ash wood trim and aluminum trim, a new Cocoa/Dark Atmosphere color theme, and unique stitching. Both the AT4 and Denali offer the same two engine choices. There's either the 3.6-liter V6 throwing out 308 horsepower and 275 pound-feet of torque, shifting through an eight-speed automatic, or the 2.8-liter Duramax diesel producing 181 hp and 369 lb-ft, shifting through a six-speed auto. The 2021 trucks will be available later this year, pricing to be announced closer to the on-sale date. The 2020 Canyon All Terrain starts at $37,695, the 2020 Canyon Denali starts at $41,595. Featured Gallery 2021 GMC Canyon AT4 View 11 Photos Related Gallery 2021 GMC Canyon AT4 View 11 Photos GMC Truck Luxury Off-Road Vehicles

GM recalls Colorado, Canyon, and Malibu for airbag problem

The Basics: General Motors will recall and issue a stop sale on 1,740 total examples of the 2016 Chevrolet Colorado, Malibu, and GMC Canyon. This includes 1,579 units in the US and 161 in Canada. The Problem: The second stage of the driver front airbag inflator might not be present. If this happens, the airbag won't fill as quickly as it should in a high-speed crash, which could increase the risk of injury, according to Reuters. This is not related in any way to Takata's inflator problems, and these parts come from a different supplier. Injuries/Deaths: None reported. The Fix: GM will replace the vehicles' airbag assemblies. If You Own One: GM spokesperson Tom Wilkinson told Autoblog he wasn't specifically sure when recall repairs would begin but said it would be "shortly." He expects the fixes to happen "quickly" because of the small number of affected vehicles, and many of them are either in transport or already in dealer stock. More Information: GM recalled the 2015 Canyon and Colorado in 2014 for a completely separate airbag issue. In that case, a manufacturing error improperly wired the connectors. Related Video: GM Statement GM is recalling 1,579 MY 2016 Chevrolet Colorado, GMC Canyon and Chevrolet Malibu vehicles in the United States and 161 in Canada to replace driver-side front airbags. The second stage of the airbag may not deploy properly in certain high-speed crashes. During a routine quality inspection, it was determined that a component required for a second-stage/high-output deployment was not loaded during the inflator build. Dealers will replace the driver-side front airbag assembly. There have been no reports of crashes or injuries related to this issue. This issue is unrelated to the ongoing Takata recalls.