2012 Gmc Savana 2500 Lt1 - 12 Passenger Van 4-door 6.0l 12 Passenger Blue on 2040-cars

Auto blog

Diesel Power finds the ultimate modified oil-burner

For nine years, Diesel Power magazine has run the Diesel Power Challenge, this year's grindfest being "a week-long torture test that features seven events, nine trucks, 8,000 horsepower, and nearly 15,000 pound-feet of torque." The road to being crowned "the most powerful truck" starts with a dyno run, and then continues through the completion of a CDL-style obstacle course, an eighth-of-a-mile drag race while towing a 10,000-pound trailer, a quarter-mile drag race without a trailer, a fuel economy test in the mountains and finally a sled-pulling test through a 300-foot-long packed-mud pit.
What kind of trucks get into such a fight? Last year's winner, for instance - who upgraded his truck this year to prove he didn't "luck into the win" - drives a 2008 Ford F-250 Super Duty with a 6.4-liter Power Stroke V8 upgraded with a custom intake, Elite Diesel triple turbos and a two-stage nitrous system. Another competitor has a 2005 Dodge Ram 2500 powered by a 5.9-liter Cummins inline-six, upgraded with Garrett turbos, dual-stage nitrous, a seven-inch exhaust stack and twin fans built into the bed to cool the Sun Coast Omega transmission. The numbers on that truck: 1,255 horsepower, and 2,063 pound-feet of torque at the wheels. Naturally, as the image above might suggest, things don't always end well.
You'll find all five videos covering this years challenge below. A scene in the dyno video sums it all up perfectly: a competitor leaves his nitrous on too long and the crew is treated to some ominous poppings, he leans out the window, throws both hands up and shouts, "Amer'ca!"

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GMC Hummer EV revealed as a 1,000-hp, 350-mile, fast-charging beast

The 2022 GMC Hummer EV has finally been revealed, and it certainly looks the part. It has chunky, squared-off styling, big tires pushed to the edges, and a towering fascia. But it’s not a case of form over function. On the contrary, the Hummer EV is has some pretty wicked technology and gear under the skin. The first version of the Hummer EV that will be available is the tricked-out Edition 1. It features three electric motors, which allows for torque vectoring. These motors make 1,000 horsepower, though GMC still hasnÂ’t given real-world torque numbers. The motors are fed by a 24-module Ultium battery pack. The pack can provide an estimated 350 miles or more of range. Not only that, but it supports 800-volt fast charging up to 350 kW. ThatÂ’s comparable to PorscheÂ’s charging system, and GMC says it can add an extra 100 miles of range in just 10 minutes. Later, a two-motor Hummer EV and a three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of 2 feet and the capability to climb over an 18-inch vertical obstacle. Owners will be able to easily add more clearance since GMC made the wheel arches large enough to accommodate aftermarket 37-inch tires. Additional off-road goodies include skid plates along the chassis, rock sliders, the previously covered four-wheel steering with Crab Mode diagonal driving, and 18 camera views including angles under the truck for getting over rocks. Those cameras feature sprayers, too to keep them clean. Detailed information on torque output, torque vectoring, tire pressure, vehicle angles and more are also displayed on the infotainment screen. Speaking of that infotainment screen, itÂ’s a massive 13.4 inches and is paired with a 12.3-inch instrument display. They feature proudly in a squared-off, rugged-looking interior. The Hummer EV will get the latest version of Super Cruise, complete with automatic lane-changing. The Edition 1 gets the removable roof panels as standard, and those roof panels are clear, so you can still get some sun with them in place.