2007 Gmc Savana Explorer X-se Van Conversion W/bathroom, Less Than 3,000 Miles on 2040-cars

Auto blog

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

Trademark application points to evolution of new Hummer EV logo

A trademark application has revealed yet another evolution of the logo expected to adorn GMC's new Hummer EV pickup truck, bringing back the big "H" badge utilized on the H2 and H3 model lines of the expanded SUV lineup's heyday.  The image included with the filing depicts a logo that should be familiar to Hummer fans (or really any American who left their house between 2003 and 2010), with "EV" supplanting the old numerical model indicator. The "Hummer" and "EV" typeface appears to be a direct lift from a filing that surfaced back in April.  This should provide some comfort to folks who are fans of the idea of a future-proofed, all-electric pickup, but want something that embodies the charisma and road presence of the models sold in Hummer's now-deceased, not-so-environmentally-spectacular incarnation. While we don't yet know really any details of the new all-electric SUV, we do know it will be sold via GMC dealers, meaning the revived nameplate will not bring the rest of the Hummer brand along with it.  We haven't really seen much of the new truck, save for teasers and hints here and there. Even the "reveal" back in June only gave us a vague, big-picture look at the truck's silhouette, and various companion images and videos have hinted at features such as a removable roof assembly.  The truck’s general shape is off-road oriented with squared-off, sharp lines tracing the entire silhouette. Its big, knobby tires and blocky wheels are clear indicators of what GM was aiming for with this electric pickup. As for the SUV, comparisons to the Ford Bronco four-door will be inevitable. If our eyes are picking up the scale of this photo correctly, though, the Hummer SUV appears to be a slightly larger vehicle than the four-door Bronco is. Although, the wheelbase for the SUV is shorter than that of the Hummer truck. ThatÂ’ll help it off-road. Those small bumpers and short overhangs along with the bumper cutouts should be hugely beneficial to approach and departure angles, as well. GMCÂ’s shots of the Hummer in the studio are equally as revealing. We can see what looks to be an intense front skid plate and two big tow hooks. In addition to the off-road gear, GMC has allowed a look at the frunk. The front “grille” is one piece with the hood of the truck, so the whole assembly pulls up. That makes for what appears to be a very easy-to-load front trunk compared to other EVs that force you to lift items up and over the front of the car.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.