1967 Gmc Panel Truck on 2040-cars

Auto blog

GM issues 4 new recalls for 90k vehicles, Chevy, Buick, GMC affected

One day after releasing an internal report that found a pattern of "incompetence and neglect" within the company, General Motors announced four more recalls that affect 89,126 vehicles. One of the recalls affects 31,520 vehicles that may contain a defect that could prevent airbags from deploying in a car accident. GM said it was aware of at least one crash in which a vehicle occupant sustained an injury because the airbags didn't deploy when they should have. The company said it was aware of other crashes that were similar in nature, but it is not yet known whether they're related to the condition, in which the shorting bar inside the driver's airbag may occasionally contact the airbag terminals. If the car and terminals are touching each other in a crash, the bags will not deploy. Vehicles from the 2012 model year are affected by the problem, and they include the Buick Verano, Chevrolet Camaro, Cruze and Sonic. GM has conducted two previous recalls for this condition involving 7,116 cars. GM is also recalling 57,512 models of the 2014 Chevrolet Silverado 1500, 2014 GMC Sierra 1500 and 2015 Silverado HD, Tahoe and Surburan, as well as the 2015 GMC Sierra HD, Yukon and Yukon XL models because their radio control modules may not work, and thus prevent certain audible safety warnings. Certain models of the 2013-2014 Chevrolet Spark and 2013 Buick Encore are being recalled for a different airbag problem, which could prevent airbags from deploying properly during a crash. And 33 2014 Chevrolet Corvettes are being recalled for yet another airbag problem, in which an internal short circuit could disable the airbags. So far in 2014, General Motors has issued 34 separate recalls that affect approximately 15.9 million vehicles – more than the company has sold in the past five years combined. GM Announces Four Recalls DETROIT – General Motors today announced three safety recalls and one non-compliance recall, all of which were reported to the NHTSA on Thursday, June 5, 2014. In all cases, customers will receive letters from GM letting them know when they can bring their vehicles into a dealership, where all repairs will be performed free of charge and courtesy transportation would be provided as needed.

New GM subcompact SUV spied, could be a Chevy or GMC

GM's pair of subcompact crossovers have been trundling along for a while now. The Buick Encore was the first for Americans in the 2013 model year, and the Chevy Trax that was based on the Encore (an encore of the Encore, if you will) arrived for the 2015 model year. Each has undergone a mild update, but these spy photos could indicate their replacements are in the works. Or not. For starters, we can't be sure which GM brand this new SUV is destined for. Though the timing and its flowing lines could indicate Buick, the thick horizontal bars visible in the grille would indicate otherwise. The next Encore being at least related to this is at least a possibility. Making the case for GMC are those thick grille bars, the fact that it extends far below the lights, and may even rise above them, similar to the Acadia. And that rising beltline isn't that different from that of the Acadia. Arguing against the GMC idea is the Encore, which is almost always sold in GMC-Buick combo dealers. Much as the Acadia was made smaller to eliminate confusion and in-house competition with the Enclave, it's hard to see GM opting to resurrect such an issue at the bottom end of the SUV market. That means we're leaning toward this little SUV wearing a Chevy bowtie. The split grille with a large lower section and small upper section is the brand's current design language, as seen on the new Malibus and Cruzes. The shape is vaguely Equinox-like. And like Buick, Chevy also has a subcompact crossover ready for replacement: the Trax. Now, our photographer reports he's seen another subcompact testing that has Blazer design cues, but in this crossover-hungry market, we wouldn't be surprised if two similarly sized but differently styled Chevy crossovers make the grade. It's a strategy that's working pretty well for Jeep. We'll no doubt be seeing more of these disguised test vehicles milling about the country in the coming months, so perhaps we'll eventually get a better idea of what this is before more official information starts trickling out within one or two years. Related Video: Featured Gallery GM Subcompact Crossover spy shots View 10 Photos Image Credit: SpiedBilde Spy Photos Buick Chevrolet GM GMC Crossover SUV buick encore chevy trax

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.