2006 Gmc 5500 Flatbed on 2040-cars

Auto blog

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

2018 GMC Terrain loses the V6 and gains a diesel for an all-turbo lineup

You may have noticed that compact crossovers are kind of a big deal these days. After eight years on sale, GMC is finally getting a new version of its littlest ute, the Terrain, for 2018. And it can't arrive a moment too soon. The 2018 GMC Terrain made its debut tonight on the eve of the 2017 Detroit Auto Show. The 2018 Terrain looks to be completely new, and is now built on GM's D2XX platform. It again shares a platform and major components with the Chevrolet Equinox; like the 2018 Equinox, the Terrain will offer three engines, including two turbocharged gas four-cylinders and a turbodiesel four. The base 1.5-liter gas four makes 170 horsepower and 203 pound-feet of torque, while the 2.0-liter inline-four puts out 252 hp and 262 lb-ft. (The 2.0 basically takes the place of the 3.6-liter V6 offered in the outgoing Terrain.) GM's 1.6-liter diesel four will also be available, making 137 hp and 240 lb-ft of torque in this application. Both gas engines will be paired with nine-speed automatic transmissions, while the diesel gets a six-speed auto. No fuel-economy claims have been made, but we expect the new models to outdo the current versions, with the diesel reaching around 40 mpg on the EPA highway cycle. View 14 Photos The new Terrain's design is equally fresh and does a good job of differentiating it from the related Equinox, with details very reminiscent of the new GMC Acadia. The lighting elements are even more intricate here, with LEDs used for the daytime running lights and taillamps. GMC designers gave it the floating-roof look, which is successful aside from the odd placement of a trim badge at the base of the D-pillar. Terrains will again be available in SL, SLE, SLT, and range-topping Denali trim, with the latter featuring the signature satin chrome grille, chrome accents, and monochrome paint scheme GMC uses on all of its top-trim models. The interior sees an upgrade in materials and a more-thoughtful layout, with a new version of GM's Electronic Precision Shift gear selector using buttons and switches instead of a lever to open up more space on the center console. Both front- and all-wheel-drive models get a Traction Select system that will tune the shift points and throttle points for specific driving conditions via a knob at the rear of the console. On models equipped with all-wheel drive, a front-drive mode disconnects the rear axle to improve fuel economy.

GM to build outgoing Silverado and Sierra until late 2019

As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video: