2006 Gmc Envoy Slt on 2040-cars
Michigan City, Indiana, United States
Body Type:Sport Utility
Vehicle Title:Clear
Engine:4.2L 256Cu. In. l6 GAS DOHC Naturally Aspirated
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 6
Make: GMC
Model: Envoy
Trim: SLT Sport Utility 4-Door
Options: Leather Wrapped Steering Wheel, Steering Wheel Audio and Climate Controls, Wood Trim, Roof Rack, Running Boards, Towing Package, Automatic Climate Control, Rear Climate Controls, OnStar Ready, Bose Audio Premium Sound System, Satellite Radio, Premium Alloy Wheels, Heated Seats, Rear Defroster and Wiper, Sunroof, 4-Wheel Drive, Leather Seats, CD Player
Drive Type: 4WD
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Mileage: 101,000
Power Options: Power Mirrors, Adjustable Pedals, Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Sub Model: SLT
Exterior Color: Pewter
Interior Color: Black
Warranty: Vehicle does NOT have an existing warranty
Buy this clean and pristine smoke-free GMC Envoy SLT! Like new on the inside, minor front right bumper sratches, like new. This truck runs beautifully, has Approx 99,900 miles on it, and has had oil changes every 3,000 miles. Features include the following: Leather seating and a leather wrapped steering wheel with radio and climate controls, wood trim, dual power heated seats, power windows, mirrors and locks; roof rack, running boards, towing package, premium wheels, automatic climate control, rear climate control, rear defroster and wiper, 18inch alloy wheels, power adjustable pedals, OnStar, and a Bose audio premium sound system with CD player and satellite radio! SLT Envoys are powered by a 4.2liter, inline sixcylinder engine. Rated at 291 horsepower and 277 poundfeet of torque, this engine outpowers most of its competitors V8s!
Title in hand.
GMC Envoy for Sale
2006 gmc envoy xl sle sport utility 4-door 4.2l
6cylinder automatic aircondition leather power windows power locks loaded
5.3l v8 sunroof navigation power leather seats dvd system tow package warranty(US $14,999.00)
08 envoy slt 2wd leather
2008 gmc envoy(US $12,888.00)
2006(06)envoy xl 4x4 we finance bad credit! buy here pay here low down $1699(US $12,995.00)
Auto Services in Indiana
Wood`s Battery & Auto Elctrc ★★★★★
Wilsons Auto Repair ★★★★★
Tread Express Tires Inc ★★★★★
The Zone Honda Kawasaki ★★★★★
Ted Brown`s Quality Paint & Body Shop ★★★★★
Swinehart Auto Service ★★★★★
Auto blog
Detroit 3 to implement delayed unified towing standards for 2015
Mon, 10 Feb 2014Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper.
For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011.
The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors.
2019 GMC Sierra carbon fiber bed: How it's made
Fri, Apr 26 2019FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.
Could the GMC Jimmy come back as a Wrangler fighter?
Mon, Jun 24 2019Every three or four years, two cars go into heavy media rotation in stories about supposed new competitors. The headlines go something like, "X automaker working on a vehicle to fight the iconic Y." The Y cars are the Porsche 911 and the Jeep Wrangler. For this story, the X automaker is GM. And since GM already has its 911-fighter poised for debut next month, we speak here of the Wrangler. Car and Driver writes that GMC might take another shot at a Jeep challenger, this time by rebirthing a body-on-frame Jimmy SUV. For any who don't know, GMC sold an S-15 Jimmy from 1982 to 2005, a twin of the Chevrolet S-10 Blazer. Those SUVs started their lives as the Chevrolet S-10 and GMC S-15/Sonoma pickups. The Blazer name has returned to the light, albeit without its old-school rugged manners. There's still an opening on the GMC side, though, so C/D says the idea would be to work that old magic on the GMC Canyon pickup. The report is more chaff than grist for the rumormill, with liberal application of phrases like "looking to come up with," "could be," "could take," and "could arrive." Having said that, a potential Jimmy model could come in a few years, could use the same six-cylinder gas and four-cylinder diesel engines as the Canyon, and could start around $30,000. The Jimmy could wear GMC's new mud-and-guts AT4 trim name, or become a mud-and-guts trim for the Canyon just as the ZR2 is for the Colorado. It's not an entirely crazy idea, however, when a body-on-frame Trailblazer SUV based on the Colorado sells in Latin America, Asia, and Australia and does pretty well in the mud and muck. GM's been on the edge of going to war with the Wrangler for at least 12 years, when a Hummer exec said the HX concept would debut at the 2008 Detroit Auto Show and go on sale in 2010 as the H4. In 2015, The Wall Street Journal said GM was canvassing GMC dealers about something to get in the ring with the Wrangler. And all that was before every other automaker had to watch Jeep open a money-counting operation to handle its Wrangler profits, and dealers started charging $20,000 markups on Gladiators. In May, spy shooters caught a sensor-laden Jeep running at GM's Milford Proving Grounds in Michigan. Earlier this month, Bloomberg reported GM is considering a Hummer revival as an all-electric hardcore SUV. So we will not be surprised if GM rolls out a Wrangler fighter in the near-ish future. But we won't be surprised if GM doesn't, either.