Slt-2 / Awd / Heated Seats / 3rd Row on 2040-cars

Auto blog

GM able to add diesel to half-ton pickups if market demands it

A few years ago, the trend in half-ton pickup trucks was ultra-luxurious trims, often with the words "limited" or "platinum" tacked on after the model name. That was well and good, but we like this latest fad a lot more - diesel engines. First, Ram came to bat with a 3.0-liter, V6 turbodiesel for the 1500, then Nissan announced that the next-generation Titan would be getting an eight-cylinder Cummins diesel.
Now, word is coming in from AutoGuide that General Motors can, if it so chooses, drop a diesel engine into its light-duty trucks. The plot thickens, though, as it turns out that said diesel would be the same one Ram is using for its truck. According to AG, that engine comes from VM Motori, which GM owns a sizable chunk of. Therefore, GM can snag the 3.0-liter, V6 diesel for its trucks just as easily, if not more easily, than Ram.
If it's so easy for the Detroit-based manufacturer to access the engines, why not offer the a diesel-powered Sierra and Silverado from the start, then? According to GM spokesman Tom Wilkinson, The General doesn't seem so confident in a diesel pickup outside of its HD offerings. According to Wilkinson, the cost-benefit ratio doesn't line up for customers, thanks to both the impact on the truck's sticker price and the higher price of diesel, in general (the national average for a gallon of diesel is 43 cents more than a gallon of 87-octane unleaded).

GM recalls 51k Enclave, Traverse, Acadia crossovers over fuel gauge inaccuracy

With all eyes fixed on General Motors in the wake of the ignition recall debacle, the auto giant has been carefully calling in a wide array of vehicles to fix anything and everything that could prove problematic. Just the other day it issued two separate recalls - one concerning the Cadillac SRX and another its heavy-duty pickups - and now it is issuing another.
This time the vehicles in question are the Buick Enclave, Chevy Traverse and GMC Acadia, three fullsize crossovers based on GM's Lambda platform. In an estimated 51,640 units manufactured between March 26 and August 15, 2013, the engine control module has been found to incorrectly display the level of fuel in the tank.
As a result, owners are being notified to bring their vehicles in to their local dealers to have the ECU reflashed to fix the problem. View the full details in the announcement below from the National Highway Traffic Safety Administration.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.