2015 Gmc Acadia Denali on 2040-cars

Auto blog

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

GMC Hummer EV could have had the Chevrolet Avalanche's Midgate

One of the many rumors swirling around the GMC Hummer EV claimed the truck would resurrect the Midgate inaugurated by the original Chevrolet Avalanche. Although we now know there's no way to fully knock down the partition between the cab and the cargo box, the firm revealed the rumor wasn't entirely false. "There was [a Midgate] early on. We opted for the functionality of the drop glass in the back. With the package layout and things like that, it was not advantageous to pursue that one. And, the five-foot bed was kind of the industry standard in regards to price of entry in that segment," explained John Mack, the Hummer's exterior design management, during an interview with Muscle Car & Trucks. The Hummer will go on sale with a five-foot box, and it doesn't sound like a longer bed will be available, so a modern version of the Midgate would have made the model more versatile by giving users the ability to fold down the partition behind the rear seats to carry bulky items, like plywood and ATVs. It's a feature that would have inevitably made the truck more complicated to build, however, because it adds moving parts that need to be sealed. Hinges, seals, and latches in turn add weight, and complexity almost always invites high manufacturing costs. As an electric pickup built with newly-developed components, the Hummer already has enough of each. Motorists who need to carry something that's significantly longer than the cargo box aren't entirely out of luck. As Mack pointed out, the rear window drops into the partition, so owners will have the ability to haul surfboards, lumber, or anything else that's relatively long and reasonably thin by simply pushing a switch. Alternatively, the only thing limiting cargo space when the roof comes off is the sky — or, depending on where you live, bridges. Mack didn't reveal when the Midgate was dropped. GMC launched the Hummer project in April 2019, and it previously released early design sketches that show how the truck transitioned from a sketch to a prototype. As of writing, nothing suggests the Midgate will make a comeback in the near future on any member of the General Motors portfolio. It was introduced in 2001 on the first-generation Chevrolet Avalanche, which went on sale in the United States for the 2002 model year. It later spread to Cadillac's luxed-up variant of the truck, the Escalade EXT, and to the short-lived GMC Envoy XUV.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.